forked from Elron_dev/elbear_arduino_bsp
klassents
0fbfd77518
- начальный загрузчик для плат elbear, elsomik обновлен до версии 0.2.0 - исключено появление краткосрочных просадок при работе ШИМ с максимальным коэффициентом заполнения - добавлена возможность пропускать код стандартного обработчика прерываний при использовании пользовательского обработчика - добавлена возможность конфигурирования вывода на вход с притяжкой к земле (INPUT_PULLDOWN) - исправление известных ошибок
64 lines
3.0 KiB
C++
64 lines
3.0 KiB
C++
/*
|
|
* --------------------------------------------------------------------------------------------------------------------
|
|
* Example sketch/program to test your firmware.
|
|
* --------------------------------------------------------------------------------------------------------------------
|
|
* This is a MFRC522 library example; for further details and other examples see: https://github.com/miguelbalboa/rfid
|
|
*
|
|
* This example test the firmware of your MFRC522 reader module, only known version can be checked. If the test passed
|
|
* it do not mean that your module is faultless! Some modules have bad or broken antennas or the PICC is broken.
|
|
*
|
|
* @author Rotzbua
|
|
* @license Released into the public domain.
|
|
*
|
|
* Typical pin layout used:
|
|
* -----------------------------------------------------------------------------------------
|
|
* MFRC522 Elbear/ Arduino Arduino Arduino Arduino
|
|
* Reader/PCD Elsomik/Start Mega Nano v3 Leonardo/Micro Pro Micro
|
|
* Signal Pin Pin Pin Pin Pin Pin
|
|
* -----------------------------------------------------------------------------------------
|
|
* RST/Reset RST 9 / P0_3 5 D9 RESET/ICSP-5 RST
|
|
* SPI SS SDA(SS) 10 / P1_4 53 D10 10 10
|
|
* SPI MOSI MOSI 11 / P1_1 51 D11 ICSP-4 16
|
|
* SPI MISO MISO 12 / P1_0 50 D12 ICSP-1 14
|
|
* SPI SCK SCK 13 / P1_2 52 D13 ICSP-3 15
|
|
*
|
|
* More pin layouts for other boards can be found here: https://github.com/miguelbalboa/rfid#pin-layout
|
|
*/
|
|
|
|
#include <SPI.h>
|
|
#include <MFRC522.h>
|
|
|
|
#define RST_PIN 9 // Configurable, see typical pin layout above
|
|
#define SS_PIN 10 // Configurable, see typical pin layout above
|
|
|
|
MFRC522 mfrc522(SS_PIN, RST_PIN); // Create MFRC522 instance
|
|
|
|
/**
|
|
* Check firmware only once at startup
|
|
*/
|
|
void setup() {
|
|
Serial.begin(9600); // Initialize serial communications with the PC
|
|
while (!Serial); // Do nothing if no serial port is opened (added for Arduinos based on ATMEGA32U4)
|
|
SPI.begin(); // Init SPI bus
|
|
mfrc522.PCD_Init(); // Init MFRC522 module
|
|
|
|
Serial.println(F("*****************************"));
|
|
Serial.println(F("MFRC522 Digital self test"));
|
|
Serial.println(F("*****************************"));
|
|
mfrc522.PCD_DumpVersionToSerial(); // Show version of PCD - MFRC522 Card Reader
|
|
Serial.println(F("-----------------------------"));
|
|
Serial.println(F("Only known versions supported"));
|
|
Serial.println(F("-----------------------------"));
|
|
Serial.println(F("Performing test..."));
|
|
bool result = mfrc522.PCD_PerformSelfTest(); // perform the test
|
|
Serial.println(F("-----------------------------"));
|
|
Serial.print(F("Result: "));
|
|
if (result)
|
|
Serial.println(F("OK"));
|
|
else
|
|
Serial.println(F("DEFECT or UNKNOWN"));
|
|
Serial.println();
|
|
}
|
|
|
|
void loop() {} // nothing to do
|