forked from Elron_dev/elbear_arduino_bsp
v0.5.0
- добавлена поддержка платы ELBEAR ACE-NANO; - добавлена поддержка плат ELSOMIK OEM и SE; - добавлена возможность работы в режиме отладки для всех плат, входящих в состав пакета. Доступно для версии ArduinoIDE 2 и выше; - добавлена поддержка библиотеки FreeRTOS; - добавлена поддержка библиотеки IRremote; - добавлена поддержка библиотеки OneWire; - добавлена поддержка аппаратного I2C0 для плат START-MIK32 и ELSOMIK. Для работы с ним доступен экземпляр класса Wire1; - добавлена поддержка аппаратного SPI0 для всех плат, входящих в пакет. Для работы с ним доступен экземпляр класса SPI1; - увеличено быстродействие функций digitalWrite, digitalRead; - исправлены известные ошибки. Co-authored-by: KlassenTS <klassen@elron.tech> Co-committed-by: KlassenTS <klassen@elron.tech>
This commit is contained in:
klassents authored and 
klassents committed
1 parent
de1f0d7fda
commit
1c8e06634c
211 files changed
+97525
-591
No files matched your search
@@ -0,0 +1,131 @@
|
||||
/*
|
||||
* SimpleReceiver.cpp
|
||||
*
|
||||
* Demonstrates receiving ONLY NEC protocol IR codes with IRremote
|
||||
* If no protocol is defined, all protocols (except Bang&Olufsen) are active.
|
||||
*
|
||||
* This file is part of Arduino-IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
|
||||
*
|
||||
************************************************************************************
|
||||
* MIT License
|
||||
*
|
||||
* Copyright (c) 2020-2023 Armin Joachimsmeyer
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is furnished
|
||||
* to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in all
|
||||
* copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
|
||||
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
|
||||
* CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
|
||||
* OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
||||
*
|
||||
************************************************************************************
|
||||
*/
|
||||
|
||||
#include <Arduino.h>
|
||||
|
||||
/*
|
||||
* Specify which protocol(s) should be used for decoding.
|
||||
* If no protocol is defined, all protocols (except Bang&Olufsen) are active.
|
||||
* This must be done before the #include <IRremote.hpp>
|
||||
*/
|
||||
//#define DECODE_DENON // Includes Sharp
|
||||
//#define DECODE_JVC
|
||||
//#define DECODE_KASEIKYO
|
||||
//#define DECODE_PANASONIC // alias for DECODE_KASEIKYO
|
||||
//#define DECODE_LG
|
||||
#define DECODE_NEC // Includes Apple and Onkyo. To enable all protocols , just comment/disable this line.
|
||||
//#define DECODE_SAMSUNG
|
||||
//#define DECODE_SONY
|
||||
//#define DECODE_RC5
|
||||
//#define DECODE_RC6
|
||||
|
||||
//#define DECODE_BOSEWAVE
|
||||
//#define DECODE_LEGO_PF
|
||||
//#define DECODE_MAGIQUEST
|
||||
//#define DECODE_WHYNTER
|
||||
//#define DECODE_FAST
|
||||
|
||||
//#define DECODE_DISTANCE_WIDTH // Universal decoder for pulse distance width protocols
|
||||
//#define DECODE_HASH // special decoder for all protocols
|
||||
|
||||
//#define DECODE_BEO // This protocol must always be enabled manually, i.e. it is NOT enabled if no protocol is defined. It prevents decoding of SONY!
|
||||
|
||||
//#define DEBUG // Activate this for lots of lovely debug output from the decoders.
|
||||
|
||||
//#define RAW_BUFFER_LENGTH 750 // For air condition remotes it requires 750. Default is 200.
|
||||
|
||||
/*
|
||||
* This include defines the actual pin number for pins like IR_RECEIVE_PIN, IR_SEND_PIN for many different boards and architectures
|
||||
*/
|
||||
// #include "PinDefinitionsAndMore.h"
|
||||
#include <IRremote.hpp> // include the library
|
||||
|
||||
#if !defined(STR_HELPER)
|
||||
#define STR_HELPER(x) #x
|
||||
#define STR(x) STR_HELPER(x)
|
||||
#endif
|
||||
|
||||
#define IR_RECEIVE_PIN 4 // P0_1
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
while (!Serial)
|
||||
; // Wait for Serial to become available. Is optimized away for some cores.
|
||||
|
||||
// Just to know which program is running on my Arduino
|
||||
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_IRREMOTE));
|
||||
|
||||
// Start the receiver and if not 3. parameter specified, take LED_BUILTIN pin from the internal boards definition as default feedback LED
|
||||
IrReceiver.begin(IR_RECEIVE_PIN, ENABLE_LED_FEEDBACK);
|
||||
|
||||
Serial.print(F("Ready to receive IR signals of protocols: "));
|
||||
printActiveIRProtocols(&Serial);
|
||||
Serial.println(F("at pin " STR(IR_RECEIVE_PIN)));
|
||||
}
|
||||
|
||||
void loop() {
|
||||
/*
|
||||
* Check if received data is available and if yes, try to decode it.
|
||||
* Decoded result is in the IrReceiver.decodedIRData structure.
|
||||
*
|
||||
* E.g. command is in IrReceiver.decodedIRData.command
|
||||
* address is in command is in IrReceiver.decodedIRData.address
|
||||
* and up to 32 bit raw data in IrReceiver.decodedIRData.decodedRawData
|
||||
*/
|
||||
if (IrReceiver.decode()) {
|
||||
|
||||
/*
|
||||
* Print a summary of received data
|
||||
*/
|
||||
if (IrReceiver.decodedIRData.protocol == UNKNOWN) {
|
||||
Serial.println(F("Received noise or an unknown (or not yet enabled) protocol"));
|
||||
// We have an unknown protocol here, print extended info
|
||||
IrReceiver.printIRResultRawFormatted(&Serial, true);
|
||||
IrReceiver.resume(); // Do it here, to preserve raw data for printing with printIRResultRawFormatted()
|
||||
} else {
|
||||
IrReceiver.resume(); // Early enable receiving of the next IR frame
|
||||
IrReceiver.printIRResultShort(&Serial);
|
||||
IrReceiver.printIRSendUsage(&Serial);
|
||||
}
|
||||
Serial.println();
|
||||
|
||||
/*
|
||||
* Finally, check the received data and perform actions according to the received command
|
||||
*/
|
||||
if (IrReceiver.decodedIRData.command == 0x10) {
|
||||
// do something
|
||||
} else if (IrReceiver.decodedIRData.command == 0x11) {
|
||||
// do something else
|
||||
}
|
||||
}
|
||||
}
|
||||
Reference in new issue
Block a user