v0.5.0

- добавлена поддержка платы ELBEAR ACE-NANO;
- добавлена поддержка плат ELSOMIK OEM и SE;
- добавлена возможность работы в режиме отладки для всех плат, входящих в состав пакета. Доступно для версии ArduinoIDE 2 и выше;
- добавлена поддержка библиотеки FreeRTOS;
- добавлена поддержка библиотеки IRremote;
- добавлена поддержка библиотеки OneWire;
- добавлена поддержка аппаратного I2C0 для плат START-MIK32 и ELSOMIK. Для работы с ним доступен экземпляр класса Wire1;
- добавлена поддержка аппаратного SPI0 для всех плат, входящих в пакет. Для работы с ним доступен экземпляр класса SPI1;
- увеличено быстродействие функций digitalWrite, digitalRead;
- исправлены известные ошибки.
Co-authored-by: KlassenTS <klassen@elron.tech>
Co-committed-by: KlassenTS <klassen@elron.tech>

libraries/IRremote/examples/SendProntoDemo/SendProntoDemo.ino

@@ -0,0 +1,100 @@
+/*
+ * SendProntoDemo.cpp
+ *
+ *  Example for sending pronto codes with the IRremote library.
+ *  The code used here, sends NEC protocol data.
+ *
+ *  This file is part of Arduino-IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
+ *
+ ************************************************************************************
+ * MIT License
+ *
+ * Copyright (c) 2020-2022 Armin Joachimsmeyer
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is furnished
+ * to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
+ * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
+ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ ************************************************************************************
+ */
+#include <Arduino.h>
+
+#define IR_SEND_PIN 3 // P0_0
+
+/*
+ * Helper macro for getting a macro definition as string
+ */
+#if !defined(STR_HELPER)
+#define STR_HELPER(x) #x
+#define STR(x) STR_HELPER(x)
+#endif
+
+#include <IRremote.hpp>
+
+#define NUMBER_OF_REPEATS 3U
+
+// The first number, here 0000, denotes the type of the signal. 0000 denotes a raw IR signal with modulation.
+// The second number, here 006C, denotes a frequency code. 006C corresponds to 1000000/(0x006c * 0.241246) = 38381 Hertz.
+// The third and the forth number denote the number of pairs (= half the number of durations) in the start- and the repeat sequence respectively.
+const char yamahaVolDown[]
+= "0000 006C 0022 0002 015B 00AD " /* Pronto header + start bit */
+        "0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 " /* Lower address byte */
+        "0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 " /* Upper address byte (inverted at 8 bit mode) */
+        "0016 0041 0016 0041 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 " /* command byte */
+        "0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 05F7 " /* inverted command byte + stop bit */
+        "015B 0057 0016 0E6C"; /* NEC repeat pattern*/
+
+IRsend irsend;
+
+void setup() {
+    Serial.begin(9600);
+    while (!Serial)
+        ; // Wait for Serial to become available. Is optimized away for some cores.
+
+    // Just to know which program is running on my Arduino
+    Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_IRREMOTE));
+    Serial.println(F("Send IR signals at pin " STR(IR_SEND_PIN)));
+
+    IrSender.begin(); // Start with IR_SEND_PIN as send pin and enable feedback LED at default feedback LED pin
+}
+
+void loop() {
+    Serial.println(F("Sending from normal memory"));
+    irsend.sendPronto(yamahaVolDown, NUMBER_OF_REPEATS);
+
+    delay(2000);
+    Serial.println(F("Sending the NEC using the F()-form: address 0x5, data 0x1A"));
+    irsend.sendPronto(F("0000 006C 0022 0002 015B 00AD " /* Pronto header + start bit */
+            "0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 " /* Lower address byte */
+            "0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 " /* Upper address byte (inverted at 8 bit mode) */
+            "0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 " /* command byte */
+            "0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 05F7 " /* inverted command byte + stop bit */
+            "015B 0057 0016 0E6C"), /* NEC repeat pattern*/
+    NUMBER_OF_REPEATS);
+    delay(2000);
+
+    // send Nec code acquired by IRreceiveDump.cpp
+    Serial.println(F("Sending NEC from RAM: address 0xFF00, data 0x15"));
+    // 006D -> 38029 Hz
+    irsend.sendPronto("0000 006D 0022 0000 015C 00AB " /* Pronto header + start bit */
+            "0017 0015 0017 0015 0017 0015 0017 0015 0017 0015 0017 0015 0017 0015 0017 0015 " /* Lower address byte */
+            "0017 003F 0017 003E 0017 003F 0017 003E 0017 003F 0015 003F 0017 003F 0015 003F " /* Upper address byte (inverted at 8 bit mode) */
+            "0017 003E 0017 0015 0017 003F 0017 0015 0017 003E 0017 0015 0017 0017 0015 0017 " /* command byte */
+            "0017 0015 0017 003E 0017 0015 0017 003F 0015 0017 0017 003E 0017 003F 0015 003F 0017 0806" /* inverted command byte + stop bit */
+    , 0); // No repeat possible, because of missing repeat pattern
+
+    delay(5000);
+}