forked from Elron_dev/elbear_arduino_bsp
v0.5.0
- добавлена поддержка платы ELBEAR ACE-NANO; - добавлена поддержка плат ELSOMIK OEM и SE; - добавлена возможность работы в режиме отладки для всех плат, входящих в состав пакета. Доступно для версии ArduinoIDE 2 и выше; - добавлена поддержка библиотеки FreeRTOS; - добавлена поддержка библиотеки IRremote; - добавлена поддержка библиотеки OneWire; - добавлена поддержка аппаратного I2C0 для плат START-MIK32 и ELSOMIK. Для работы с ним доступен экземпляр класса Wire1; - добавлена поддержка аппаратного SPI0 для всех плат, входящих в пакет. Для работы с ним доступен экземпляр класса SPI1; - увеличено быстродействие функций digitalWrite, digitalRead; - исправлены известные ошибки. Co-authored-by: KlassenTS <klassen@elron.tech> Co-committed-by: KlassenTS <klassen@elron.tech>
This commit is contained in:
klassents authored and 
klassents committed
1 parent
de1f0d7fda
commit
1c8e06634c
211 files changed
+97525
-591
No files matched your search
@@ -0,0 +1,161 @@
|
||||
/*
|
||||
* ReceiveDump.cpp
|
||||
*
|
||||
* Dumps the received signal in different flavors.
|
||||
* Since the printing takes so much time (200 ms @115200 for NEC protocol, 70ms for NEC repeat),
|
||||
* repeat signals may be skipped or interpreted as UNKNOWN.
|
||||
*
|
||||
* This file is part of Arduino-IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
|
||||
*
|
||||
************************************************************************************
|
||||
* MIT License
|
||||
*
|
||||
* Copyright (c) 2020-2024 Armin Joachimsmeyer
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is furnished
|
||||
* to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in all
|
||||
* copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
|
||||
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
|
||||
* CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
|
||||
* OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
||||
*
|
||||
************************************************************************************
|
||||
*/
|
||||
#include <Arduino.h>
|
||||
|
||||
// #include "PinDefinitionsAndMore.h" // Define macros for input and output pin etc.
|
||||
/*
|
||||
* Helper macro for getting a macro definition as string
|
||||
*/
|
||||
#if !defined(STR_HELPER)
|
||||
#define STR_HELPER(x) #x
|
||||
#define STR(x) STR_HELPER(x)
|
||||
#endif
|
||||
|
||||
#define IR_RECEIVE_PIN 4 // P0_1
|
||||
|
||||
|
||||
#if !defined(RAW_BUFFER_LENGTH)
|
||||
// For air condition remotes it requires 750. Default is 200.
|
||||
#define RAW_BUFFER_LENGTH 730 // this allows usage of 16 bit raw buffer, for RECORD_GAP_MICROS > 20000
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
* MARK_EXCESS_MICROS is subtracted from all marks and added to all spaces before decoding,
|
||||
* to compensate for the signal forming of different IR receiver modules. See also IRremote.hpp line 142.
|
||||
*
|
||||
* You can change this value accordingly to the receiver module you use.
|
||||
* The required value can be derived from the timings printed here.
|
||||
* Keep in mind that the timings may change with the distance
|
||||
* between sender and receiver as well as with the ambient light intensity.
|
||||
*/
|
||||
#define MARK_EXCESS_MICROS 20 // Adapt it to your IR receiver module. 20 is recommended for the cheap VS1838 modules.
|
||||
|
||||
//#define RECORD_GAP_MICROS 12000 // Default is 8000. Activate it for some LG air conditioner protocols
|
||||
//#define DEBUG // Activate this for lots of lovely debug output from the decoders.
|
||||
|
||||
#include <IRremote.hpp>
|
||||
|
||||
//+=============================================================================
|
||||
// Configure the Arduino
|
||||
//
|
||||
void setup() {
|
||||
pinMode(LED_BUILTIN, OUTPUT);
|
||||
|
||||
Serial.begin(9600); // Status message will be sent to PC at 9600 baud
|
||||
while (!Serial)
|
||||
; // Wait for Serial to become available. Is optimized away for some cores.
|
||||
|
||||
// Just to know which program is running on my Arduino
|
||||
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_IRREMOTE));
|
||||
|
||||
// Start the receiver and if not 3. parameter specified, take LED_BUILTIN pin from the internal boards definition as default feedback LED
|
||||
IrReceiver.begin(IR_RECEIVE_PIN, ENABLE_LED_FEEDBACK);
|
||||
|
||||
Serial.print(F("Ready to receive IR signals of protocols: "));
|
||||
printActiveIRProtocols(&Serial);
|
||||
Serial.println(F("at pin " STR(IR_RECEIVE_PIN)));
|
||||
|
||||
// infos for receive
|
||||
Serial.print(RECORD_GAP_MICROS);
|
||||
Serial.println(F(" us is the (minimum) gap, after which the start of a new IR packet is assumed"));
|
||||
Serial.print(MARK_EXCESS_MICROS);
|
||||
Serial.println();
|
||||
Serial.println(F("Because of the verbose output (>200 ms at 115200 baud), repeats are not dumped correctly!"));
|
||||
Serial.println();
|
||||
Serial.println(
|
||||
F(
|
||||
"If you receive protocol NEC, Samsung or LG, run also ReceiveDemo to check if your actual protocol is eventually NEC2 or SamsungLG, which is determined by the repeats"));
|
||||
Serial.println();
|
||||
|
||||
}
|
||||
|
||||
//+=============================================================================
|
||||
// The repeating section of the code
|
||||
//
|
||||
void loop() {
|
||||
if (IrReceiver.decode()) { // Grab an IR code
|
||||
// At 115200 baud, printing takes 200 ms for NEC protocol and 70 ms for NEC repeat
|
||||
Serial.println(); // blank line between entries
|
||||
Serial.println(); // 2 blank lines between entries
|
||||
IrReceiver.printIRResultShort(&Serial);
|
||||
// Check if the buffer overflowed
|
||||
if (IrReceiver.decodedIRData.flags & IRDATA_FLAGS_WAS_OVERFLOW) {
|
||||
Serial.println(F("Try to increase the \"RAW_BUFFER_LENGTH\" value of " STR(RAW_BUFFER_LENGTH) " in " __FILE__));
|
||||
// see also https://github.com/Arduino-IRremote/Arduino-IRremote#compile-options--macros-for-this-library
|
||||
} else {
|
||||
if (IrReceiver.decodedIRData.protocol == UNKNOWN) {
|
||||
Serial.println(F("Received noise or an unknown (or not yet enabled) protocol"));
|
||||
}
|
||||
Serial.println();
|
||||
IrReceiver.printIRSendUsage(&Serial);
|
||||
Serial.println();
|
||||
Serial.println(F("Raw result in internal ticks (50 us) - with leading gap"));
|
||||
IrReceiver.printIRResultRawFormatted(&Serial, false); // Output the results in RAW format
|
||||
Serial.println(F("Raw result in microseconds - with leading gap"));
|
||||
IrReceiver.printIRResultRawFormatted(&Serial, true); // Output the results in RAW format
|
||||
Serial.println(); // blank line between entries
|
||||
Serial.print(F("Result as internal 8bit ticks (50 us) array - compensated with MARK_EXCESS_MICROS="));
|
||||
Serial.println(MARK_EXCESS_MICROS);
|
||||
IrReceiver.compensateAndPrintIRResultAsCArray(&Serial, false); // Output the results as uint8_t source code array of ticks
|
||||
Serial.print(F("Result as microseconds array - compensated with MARK_EXCESS_MICROS="));
|
||||
Serial.println(MARK_EXCESS_MICROS);
|
||||
IrReceiver.compensateAndPrintIRResultAsCArray(&Serial, true); // Output the results as uint16_t source code array of micros
|
||||
IrReceiver.printIRResultAsCVariables(&Serial); // Output address and data as source code variables
|
||||
Serial.println(); // blank line between entries
|
||||
|
||||
IrReceiver.compensateAndPrintIRResultAsPronto(&Serial);
|
||||
|
||||
/*
|
||||
* Example for using the compensateAndStorePronto() function.
|
||||
* Creating this String requires 2210 bytes program memory and 10 bytes RAM for the String class.
|
||||
* The String object itself requires additional 440 bytes RAM from the heap.
|
||||
* This values are for an Arduino Uno.
|
||||
*/
|
||||
// Serial.println(); // blank line between entries
|
||||
// String ProntoHEX = F("Pronto HEX contains: "); // Assign string to ProtoHex string object
|
||||
// if (int size = IrReceiver.compensateAndStorePronto(&ProntoHEX)) { // Dump the content of the IReceiver Pronto HEX to the String object
|
||||
// // Append compensateAndStorePronto() size information to the String object (requires 50 bytes heap)
|
||||
// ProntoHEX += F("\r\nProntoHEX is "); // Add codes size information to the String object
|
||||
// ProntoHEX += size;
|
||||
// ProntoHEX += F(" characters long and contains "); // Add codes count information to the String object
|
||||
// ProntoHEX += size / 5;
|
||||
// ProntoHEX += F(" codes");
|
||||
// Serial.println(ProntoHEX.c_str()); // Print to the serial console the whole String object
|
||||
// Serial.println(); // blank line between entries
|
||||
// }
|
||||
}
|
||||
IrReceiver.resume(); // Prepare for the next IR frame
|
||||
}
|
||||
}
|
||||
Reference in new issue
Block a user