use python 3.8 typing syntax

mik32_eeprom.py

@@ -1,4 +1,4 @@
-
+from typing import List
 import time
 from .tclrpc import TclException
 from .tclrpc import OpenOcdTclRpc
@@ -139,7 +139,7 @@ def eeprom_write_word(openocd: OpenOcdTclRpc, address:int, word:int):
     openocd.write_word(EEPROM_REGS_EECON, (1 << EEPROM_EX_S) | (1 << EEPROM_BWE_S) | (EEPROM_OP_PR << EEPROM_OP_S))
     time.sleep(0.001)
 
-def eeprom_write_page(openocd: OpenOcdTclRpc, address:int, data:list[int]):
+def eeprom_write_page(openocd: OpenOcdTclRpc, address:int, data:List[int]):
     openocd.write_word(EEPROM_REGS_EECON, 1 << EEPROM_BWE_S)
     openocd.write_word(EEPROM_REGS_EEA, address)
     page_address = address & EEPROM_PAGE_MASK
@@ -152,7 +152,7 @@ def eeprom_write_page(openocd: OpenOcdTclRpc, address:int, data:list[int]):
     openocd.write_word(EEPROM_REGS_EECON, (1 << EEPROM_EX_S) | (1 << EEPROM_BWE_S) | (EEPROM_OP_PR << EEPROM_OP_S))
     time.sleep(0.001)
 
-def eeprom_check_data_apb(openocd: OpenOcdTclRpc, words: list[int]) -> int:
+def eeprom_check_data_apb(openocd: OpenOcdTclRpc, words: List[int]) -> int:
     print("EEPROM check through APB...")
     openocd.write_word(EEPROM_REGS_EEA, 0x00000000)
     word_num = 0
@@ -172,7 +172,7 @@ def eeprom_check_data_apb(openocd: OpenOcdTclRpc, words: list[int]) -> int:
     print("EEPROM check through APB done!")
     return 0
 
-def eeprom_check_data_ahb_lite(openocd: OpenOcdTclRpc, words: list[int]) -> int:
+def eeprom_check_data_ahb_lite(openocd: OpenOcdTclRpc, words: List[int]) -> int:
     print("EEPROM check through AHB-Lite...")
     mem_array = openocd.read_memory(0x01000000, 32, len(words))
     if len(words) != len(mem_array):
@@ -193,7 +193,7 @@ def eeprom_check_data_ahb_lite(openocd: OpenOcdTclRpc, words: list[int]) -> int:
     return 0
 
 
-def write_words(words: list[int], write_by_word = False, read_through_apb = False, is_resume=True) -> int:
+def write_words(words: List[int], write_by_word = False, read_through_apb = False, is_resume=True) -> int:
     """
     Write words in MIK32 EEPROM through APB bus
 

mik32_parsers.py

@@ -1,5 +1,6 @@
+from typing import List, Dict
 
-def parse_hex(file: str) -> dict:
+def parse_hex(file: str) -> Dict:
     """
     TODO: Implement support for more record types
     """
@@ -30,7 +31,7 @@ def parse_hex(file: str) -> dict:
         reclen = int(line[1:3], base=16)        # Record length
         load_offset = int(line[3:7], base=16)   # Initial address of data byte
         rectype = int(line[7:9], base=16)       # Record type
-        data_bytes: list[str] = []
+        data_bytes: List[str] = []
 
         data_bytes_line = line[9:reclen*2 + 9]
         for i in range(reclen):
@@ -95,15 +96,15 @@ def parse_hex(file: str) -> dict:
     return memory_blocks
 
 
-def parse_bin(filename: str) -> list[int]:
+def parse_bin(filename: str) -> List[int]:
-    arr: list[int] = []
+    arr: List[int] = []
     with open(filename, "rb") as f:
         while byte := f.read(1):
             arr.append(byte[0])
     return arr
 
 
-def bytes2words(arr: list[int]) -> list[int]:
+def bytes2words(arr: List[int]) -> List[int]:
     word = []
     words = []
     for byte in arr:
@@ -113,8 +114,8 @@ def bytes2words(arr: list[int]) -> list[int]:
             word = []
     return words
 
-def get_content(filename: str) -> list[int]:
+def get_content(filename: str) -> List[int]:
-    content: list[int] = []
+    content: List[int] = []
 
     if filename.endswith(".bin"):
         content = parse_bin(filename)

mik32_spifi.py

@@ -1,3 +1,4 @@
+from typing import List
 import time
 from .tclrpc import TclException
 from .tclrpc import OpenOcdTclRpc
@@ -333,9 +334,9 @@ def spifi_chip_erase(openocd: OpenOcdTclRpc):
     spifi_wait_intrq_timeout(openocd, "Timeout executing chip erase command")
 
 
-def spifi_read_data(openocd: OpenOcdTclRpc, address: int, byte_count: int, bin_data: list[int]):
+def spifi_read_data(openocd: OpenOcdTclRpc, address: int, byte_count: int, bin_data: List[int]):
     print("read data")
-    read_data: list[int] = []
+    read_data: List[int] = []
     openocd.write_word(SPIFI_CONFIG_ADDR, address)
 
     """
@@ -375,7 +376,7 @@ def spifi_read_data(openocd: OpenOcdTclRpc, address: int, byte_count: int, bin_d
             print(f"DATA[{i+address}] = {read_data[i]:#0x} - ошибка")
 
 
-def spifi_page_program(openocd: OpenOcdTclRpc, ByteAddress: int, data: list[int], byte_count: int):
+def spifi_page_program(openocd: OpenOcdTclRpc, ByteAddress: int, data: List[int], byte_count: int):
     if byte_count > 256:
         raise Exception("Byte count more than 256")
 
@@ -409,7 +410,7 @@ def spifi_erase(openocd):
     spifi_wait_busy(openocd)
 
 
-def spifi_write(openocd: OpenOcdTclRpc, address: int, data: list[int], data_len: int):
+def spifi_write(openocd: OpenOcdTclRpc, address: int, data: List[int], data_len: int):
     if data_len > 256:
         raise Exception("Byte count more than 256")
 
@@ -420,7 +421,7 @@ def spifi_write(openocd: OpenOcdTclRpc, address: int, data: list[int], data_len:
     print("written")
 
 
-def spifi_write_file(bytes: list[int], is_resume=True):
+def spifi_write_file(bytes: List[int], is_resume=True):
     """
     Write bytes in MIK32 External SPIFI Flash memory