KlassenTS
1c8e06634c
- добавлена поддержка платы ELBEAR ACE-NANO; - добавлена поддержка плат ELSOMIK OEM и SE; - добавлена возможность работы в режиме отладки для всех плат, входящих в состав пакета. Доступно для версии ArduinoIDE 2 и выше; - добавлена поддержка библиотеки FreeRTOS; - добавлена поддержка библиотеки IRremote; - добавлена поддержка библиотеки OneWire; - добавлена поддержка аппаратного I2C0 для плат START-MIK32 и ELSOMIK. Для работы с ним доступен экземпляр класса Wire1; - добавлена поддержка аппаратного SPI0 для всех плат, входящих в пакет. Для работы с ним доступен экземпляр класса SPI1; - увеличено быстродействие функций digitalWrite, digitalRead; - исправлены известные ошибки. Co-authored-by: KlassenTS <klassen@elron.tech> Co-committed-by: KlassenTS <klassen@elron.tech>
124 lines
4.7 KiB
C++
124 lines
4.7 KiB
C++
/*
|
|
* ir_BoseWave.cpp
|
|
*
|
|
* Contains functions for receiving and sending Bose IR Protocol
|
|
*
|
|
* This file is part of Arduino-IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
|
|
*
|
|
*/
|
|
#ifndef _IR_BOSEWAVE_HPP
|
|
#define _IR_BOSEWAVE_HPP
|
|
|
|
#if defined(DEBUG) && !defined(LOCAL_DEBUG)
|
|
#define LOCAL_DEBUG
|
|
#else
|
|
//#define LOCAL_DEBUG // This enables debug output only for this file
|
|
#endif
|
|
|
|
/** \addtogroup Decoder Decoders and encoders for different protocols
|
|
* @{
|
|
*/
|
|
//==============================================================================
|
|
// BBBB OOO SSSS EEEEE
|
|
// B B O O S E
|
|
// BB B O O SSS EEEE
|
|
// B B O O S E
|
|
// BBBB OOO SSSS EEEEE
|
|
//==============================================================================
|
|
// see http://lirc.sourceforge.net/remotes/bose/WAVERADIO
|
|
// see: https://www.mikrocontroller.net/articles/IRMP_-_english#BOSE
|
|
//
|
|
// Support for Bose Wave Radio CD initially provided by https://github.com/uvotguy.
|
|
//
|
|
// As seen on my oscilloscope, there is no repeat code. Instead, when I
|
|
// press and hold a button on my remote, it sends a command, makes a 51.2ms space,
|
|
// and resends the command again, and so on.
|
|
// 38 kHz, LSB first, 1 start bit + 8 bit data + 8 bit inverted data + 1 stop bit.
|
|
#define BOSEWAVE_BITS 16 // Command and inverted command
|
|
|
|
#define BOSEWAVE_HEADER_MARK 1014 // 1014 are 39 clock periods (I counted 3 times!)
|
|
#define BOSEWAVE_HEADER_SPACE 1468 // 1468(measured), 1456 are 56 clock periods
|
|
#define BOSEWAVE_BIT_MARK 520 // 520 are 20 clock periods
|
|
#define BOSEWAVE_ZERO_SPACE 468 // 468 are 18 clock periods
|
|
#define BOSEWAVE_ONE_SPACE 1468 // 1468(measured), 1456 are 56 clock periods
|
|
|
|
#define BOSEWAVE_REPEAT_PERIOD 75000
|
|
#define BOSEWAVE_REPEAT_DISTANCE 50000
|
|
#define BOSEWAVE_MAXIMUM_REPEAT_DISTANCE 62000
|
|
|
|
struct PulseDistanceWidthProtocolConstants BoseWaveProtocolConstants = { BOSEWAVE, BOSEWAVE_KHZ, BOSEWAVE_HEADER_MARK,
|
|
BOSEWAVE_HEADER_SPACE, BOSEWAVE_BIT_MARK, BOSEWAVE_ONE_SPACE, BOSEWAVE_BIT_MARK, BOSEWAVE_ZERO_SPACE, PROTOCOL_IS_LSB_FIRST
|
|
, (BOSEWAVE_REPEAT_PERIOD / MICROS_IN_ONE_MILLI), NULL };
|
|
|
|
/************************************
|
|
* Start of send and decode functions
|
|
************************************/
|
|
|
|
void IRsend::sendBoseWave(uint8_t aCommand, int_fast8_t aNumberOfRepeats) {
|
|
|
|
// send 8 command bits and then 8 inverted command bits LSB first
|
|
uint16_t tData = ((~aCommand) << 8) | aCommand;
|
|
sendPulseDistanceWidth(&BoseWaveProtocolConstants, tData, BOSEWAVE_BITS, aNumberOfRepeats);
|
|
}
|
|
|
|
bool IRrecv::decodeBoseWave() {
|
|
|
|
if (!checkHeader(&BoseWaveProtocolConstants)) {
|
|
return false;
|
|
}
|
|
|
|
// Check we have enough data +4 for initial gap, start bit mark and space + stop bit mark
|
|
if (decodedIRData.rawlen != (2 * BOSEWAVE_BITS) + 4) {
|
|
IR_DEBUG_PRINT(F("Bose: "));
|
|
IR_DEBUG_PRINT(F("Data length="));
|
|
IR_DEBUG_PRINT(decodedIRData.rawlen);
|
|
IR_DEBUG_PRINTLN(F(" is not 36"));
|
|
return false;
|
|
}
|
|
|
|
if (!decodePulseDistanceWidthData(&BoseWaveProtocolConstants, BOSEWAVE_BITS)) {
|
|
#if defined(LOCAL_DEBUG)
|
|
Serial.print(F("Bose: "));
|
|
Serial.println(F("Decode failed"));
|
|
#endif
|
|
return false;
|
|
}
|
|
|
|
// Stop bit
|
|
if (!matchMark(decodedIRData.rawDataPtr->rawbuf[3 + (2 * BOSEWAVE_BITS)], BOSEWAVE_BIT_MARK)) {
|
|
#if defined(LOCAL_DEBUG)
|
|
Serial.print(F("Bose: "));
|
|
Serial.println(F("Stop bit mark length is wrong"));
|
|
#endif
|
|
return false;
|
|
}
|
|
|
|
// Success
|
|
// decodedIRData.flags = IRDATA_FLAGS_IS_LSB_FIRST; // Not required, since this is the start value
|
|
uint16_t tDecodedValue = decodedIRData.decodedRawData;
|
|
uint8_t tCommandNotInverted = tDecodedValue & 0xFF; // comes first and is in the lower bits (LSB first :-))
|
|
uint8_t tCommandInverted = tDecodedValue >> 8;
|
|
// parity check for command. Use this variant to avoid compiler warning "comparison of promoted ~unsigned with unsigned [-Wsign-compare]"
|
|
if ((tCommandNotInverted ^ tCommandInverted) != 0xFF) {
|
|
#if defined(LOCAL_DEBUG)
|
|
Serial.print(F("Bose: "));
|
|
Serial.println(F("Command and inverted command check failed"));
|
|
#endif
|
|
return false;
|
|
}
|
|
decodedIRData.command = tCommandNotInverted;
|
|
decodedIRData.numberOfBits = BOSEWAVE_BITS;
|
|
decodedIRData.protocol = BOSEWAVE;
|
|
|
|
// check for repeat
|
|
checkForRepeatSpaceTicksAndSetFlag(BOSEWAVE_MAXIMUM_REPEAT_DISTANCE / MICROS_PER_TICK);
|
|
|
|
return true;
|
|
}
|
|
|
|
/** @}*/
|
|
#if defined(LOCAL_DEBUG)
|
|
#undef LOCAL_DEBUG
|
|
#endif
|
|
#endif // _IR_BOSEWAVE_HPP
|