Добавил сообщения об ошибках, функция write теперь повторяет функцию update, put и get теперь принимают не указатели, а данные

libraries/EEPROM/examples/eeprom_iteration/eeprom_iteration.ino

@@ -6,9 +6,6 @@
 
     Running this sketch is not necessary, this is
     simply highlighting certain programming methods.
-
-    Written by Christopher Andrews 2015
-    Released under MIT licence.
 ***/
 
 #include <EEPROM.h>

libraries/EEPROM/examples/eeprom_put/eeprom_put.ino

@@ -9,9 +9,6 @@
     the put method will use update semantics. As in a byte
     will only be written to the EEPROM if the data is actually
     different.
-
-    Written by Christopher Andrews 2015
-    Released under MIT licence.
 ***/
 
 #include <EEPROM.h>

libraries/EEPROM/examples/eeprom_read/eeprom_read.ino

@@ -3,7 +3,6 @@
  *
  * Reads the value of each byte of the EEPROM and prints it
  * to the computer.
- * This example code is in the public domain.
  */
 
 #include <EEPROM.h>
@@ -29,29 +28,11 @@ void loop() {
   Serial.print("\t");
   Serial.print(value, DEC);
   Serial.println();
-
-  /***
-    Advance to the next address, when at the end restart at the beginning.
-
-    Larger AVR processors have larger EEPROM sizes, E.g:
-    - Arduino Duemilanove: 512 B EEPROM storage.
-    - Arduino Uno:         1 kB EEPROM storage.
-    - Arduino Mega:        4 kB EEPROM storage.
-
-    Rather than hard-coding the length, you should use the pre-provided length function.
-    This will make your code portable to all AVR processors.
-  ***/
+  
   address = address + 1;
   if (address == EEPROM.length()) {
     address = 0;
   }
 
-  /***
-    As the EEPROM sizes are powers of two, wrapping (preventing overflow) of an
-    EEPROM address is also doable by a bitwise and of the length - 1.
-
-    ++address &= EEPROM.length() - 1;
-  ***/
-
   delay(500);
 }

libraries/EEPROM/examples/eeprom_update/eeprom_update.ino

@@ -7,8 +7,6 @@
 
    If a value has not changed in the EEPROM, it is not overwritten
    which would reduce the life span of the EEPROM unnecessarily.
-
-   Released using MIT licence.
  ***/
 
 #include <EEPROM.h>
@@ -26,7 +24,7 @@ void loop() {
     0 to 1023 and each byte of the EEPROM can only hold a
     value from 0 to 255.
   ***/
-  int val = analogRead(0) / 4;
+  int val = analogRead(0) / 16;
 
   /***
     Update the particular EEPROM cell.
@@ -43,29 +41,10 @@ void loop() {
     }
   ***/
 
-
-  /***
-    Advance to the next address, when at the end restart at the beginning.
-
-    Larger AVR processors have larger EEPROM sizes, E.g:
-    - Arduino Duemilanove: 512 B EEPROM storage.
-    - Arduino Uno:         1 kB EEPROM storage.
-    - Arduino Mega:        4 kB EEPROM storage.
-
-    Rather than hard-coding the length, you should use the pre-provided length function.
-    This will make your code portable to all AVR processors.
-  ***/
   address = address + 1;
   if (address == EEPROM.length()) {
     address = 0;
   }
 
-  /***
-    As the EEPROM sizes are powers of two, wrapping (preventing overflow) of an
-    EEPROM address is also doable by a bitwise and of the length - 1.
-
-    ++address &= EEPROM.length() - 1;
-  ***/
-
   delay(100);
 }

libraries/EEPROM/examples/eeprom_write/eeprom_write.ino

@@ -22,7 +22,7 @@ void loop() {
     value from 0 to 255.
   ***/
 
-  int val = analogRead(0) / 4;
+  int val = analogRead(0) / 16;
 
   /***
     Write the value to the appropriate byte of the EEPROM.
@@ -32,29 +32,10 @@ void loop() {
 
   EEPROM.write(addr, val);
 
-  /***
-    Advance to the next address, when at the end restart at the beginning.
-
-    Larger AVR processors have larger EEPROM sizes, E.g:
-    - Arduino Duemilanove: 512 B EEPROM storage.
-    - Arduino Uno:         1 kB EEPROM storage.
-    - Arduino Mega:        4 kB EEPROM storage.
-
-    Rather than hard-coding the length, you should use the pre-provided length function.
-    This will make your code portable to all AVR processors.
-  ***/
   addr = addr + 1;
   if (addr == EEPROM.length()) {
     addr = 0;
   }
-
-  /***
-    As the EEPROM sizes are powers of two, wrapping (preventing overflow) of an
-    EEPROM address is also doable by a bitwise and of the length - 1.
-
-    ++addr &= EEPROM.length() - 1;
-  ***/
-
-
+  
   delay(100);
 }