удалила лишнее из примеров

libraries/IRremote/examples/SendLGAirConditionerDemo/SendLGAirConditionerDemo.ino

@@ -42,19 +42,21 @@
 //#define USE_LG2_PROTOCOL // Try it if you do not have success with the default LG protocol
 #define NUMBER_OF_COMMANDS_BETWEEN_PRINT_OF_MENU 5
 
-#if !defined(ARDUINO_ESP32C3_DEV) // This is due to a bug in RISC-V compiler, which requires unused function sections :-(.
-#define DISABLE_CODE_FOR_RECEIVER // Disables static receiver code like receive timer ISR handler and static IRReceiver and irparams data. Saves 450 bytes program memory and 269 bytes RAM if receiving functions are not required.
-#endif
-
 #define INFO // Deactivate this to save program memory and suppress info output from the LG-AC driver.
 //#define DEBUG // Activate this for more output from the LG-AC driver.
 
-#include "PinDefinitionsAndMore.h" // Define macros for input and output pin etc.
+/*
+ * Helper macro for getting a macro definition as string
+ */
+#if !defined(STR_HELPER)
+#define STR_HELPER(x) #x
+#define STR(x) STR_HELPER(x)
+#endif
+
+#define IR_SEND_PIN 3
+
 #include <IRremote.hpp>
 
-#if defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) || defined(__AVR_ATtiny87__) || defined(__AVR_ATtiny167__)
-#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut"
-#endif
 
 #include "ac_LG.hpp"
 
@@ -66,14 +68,11 @@ Aircondition_LG MyLG_Aircondition;
 void setup() {
     pinMode(LED_BUILTIN, OUTPUT);
 
-    Serial.begin(115200);
+    Serial.begin(9600);
     while (!Serial)
         ; // Wait for Serial to become available. Is optimized away for some cores.
 
-#if defined(__AVR_ATmega32U4__) || defined(SERIAL_PORT_USBVIRTUAL) || defined(SERIAL_USB) /*stm32duino*/|| defined(USBCON) /*STM32_stm32*/ \
-    || defined(SERIALUSB_PID)  || defined(ARDUINO_ARCH_RP2040) || defined(ARDUINO_attiny3217)
-delay(4000); // To be able to connect Serial monitor after reset or power up and before first print out. Do not wait for an attached Serial Monitor!
-#endif
+
 // Just to know which program is running on my Arduino
     Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_IRREMOTE));
     Serial.println(F("Send IR signals at pin " STR(IR_SEND_PIN)));
@@ -81,7 +80,7 @@ delay(4000); // To be able to connect Serial monitor after reset or power up and
     /*
      * The IR library setup. That's all!
      */
-    IrSender.begin(); // Start with IR_SEND_PIN -which is defined in PinDefinitionsAndMore.h- as send pin and enable feedback LED at default feedback LED pin
+    IrSender.begin(); // Start with IR_SEND_PIN as send pin and enable feedback LED at default feedback LED pin
 
     Serial.println();
     MyLG_Aircondition.setType(LG_IS_WALL_TYPE);