From b92071316327a701dea85a917da862317de4b783 Mon Sep 17 00:00:00 2001
From: klassents <klassen@elron.tech>
Date: Tue, 8 Oct 2024 17:02:02 +0700
Subject: [PATCH] =?UTF-8?q?=D0=BF=D1=80=D0=B8=D0=BC=D0=B5=D1=80=20=D1=81?=
 =?UTF-8?q?=20=D0=BE=D0=B4=D0=BD=D0=B8=D0=BC=20=D0=BF=D0=BE=D1=80=D1=82?=
 =?UTF-8?q?=D0=BE=D0=BC=20=D1=80=D0=B0=D0=B1=D0=BE=D1=82=D0=B0=D0=B5=D1=82?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 .../SoftwareSerialExample.ino                 | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino

diff --git a/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
new file mode 100644
index 0000000..ef55efe
--- /dev/null
+++ b/libraries/SoftwareSerial/examples/SoftwareSerialExample/SoftwareSerialExample.ino
@@ -0,0 +1,49 @@
+/*
+  Software serial multiple serial test
+
+ Receives from the hardware serial, sends to software serial.
+ Receives from software serial, sends to hardware serial.
+
+ The circuit:
+ * RX is digital pin 2 (connect to TX of other device)
+ * TX is digital pin 6 (connect to RX of other device)
+
+ Note:
+ Not all pins on the Elbear Ace-Uno support interrupts,
+ so only the following can be used for RX:
+ 2, 3, 4, 5, 8, 9
+
+ created back in the mists of time
+ modified 25 May 2012
+ by Tom Igoe
+ based on Mikal Hart's example
+
+ This example code is in the public domain.
+
+ */
+#include <SoftwareSerial.h>
+
+SoftwareSerial mySerial(2, 6); // RX, TX
+
+void setup() {
+  // Open serial communications and wait for port to open:
+  Serial.begin(115200);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+
+  Serial.println("Goodnight moon!");
+
+  // set the data rate for the SoftwareSerial port
+  mySerial.begin(9600);
+  mySerial.println("Hello, world?");
+}
+
+void loop() { // run over and over
+  if (mySerial.available()) {
+    Serial.write(mySerial.read());
+  }
+  if (Serial.available()) {
+    mySerial.write(Serial.read());
+  }
+}