удалила лишнее из примеров

libraries/IRremote/examples/SendProntoDemo/SendProntoDemo.ino

@@ -32,11 +32,16 @@
  */
 #include <Arduino.h>
 
-#if !defined(ARDUINO_ESP32C3_DEV) // This is due to a bug in RISC-V compiler, which requires unused function sections :-(.
-#define DISABLE_CODE_FOR_RECEIVER // Disables static receiver code like receive timer ISR handler and static IRReceiver and irparams data. Saves 450 bytes program memory and 269 bytes RAM if receiving functions are not required.
+#define IR_SEND_PIN 3
+
+/*
+ * Helper macro for getting a macro definition as string
+ */
+#if !defined(STR_HELPER)
+#define STR_HELPER(x) #x
+#define STR(x) STR_HELPER(x)
 #endif
 
-#include "PinDefinitionsAndMore.h" // Define macros for input and output pin etc.
 #include <IRremote.hpp>
 
 #define NUMBER_OF_REPEATS 3U
@@ -45,9 +50,6 @@
 // The second number, here 006C, denotes a frequency code. 006C corresponds to 1000000/(0x006c * 0.241246) = 38381 Hertz.
 // The third and the forth number denote the number of pairs (= half the number of durations) in the start- and the repeat sequence respectively.
 const char yamahaVolDown[]
-#if defined(__AVR__)
-PROGMEM
-#endif
 = "0000 006C 0022 0002 015B 00AD " /* Pronto header + start bit */
         "0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 " /* Lower address byte */
         "0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 " /* Upper address byte (inverted at 8 bit mode) */
@@ -58,7 +60,7 @@ PROGMEM
 IRsend irsend;
 
 void setup() {
-    Serial.begin(115200);
+    Serial.begin(9600);
     while (!Serial)
         ; // Wait for Serial to become available. Is optimized away for some cores.
 
@@ -66,21 +68,15 @@ void setup() {
     Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_IRREMOTE));
     Serial.println(F("Send IR signals at pin " STR(IR_SEND_PIN)));
 
-    IrSender.begin(); // Start with IR_SEND_PIN -which is defined in PinDefinitionsAndMore.h- as send pin and enable feedback LED at default feedback LED pin
+    IrSender.begin(); // Start with IR_SEND_PIN as send pin and enable feedback LED at default feedback LED pin
 }
 
 void loop() {
-
-#if defined(__AVR__)
-    Serial.println(F("Sending NEC from PROGMEM: address 0x85, data 0x1B"));
-    irsend.sendPronto_P(yamahaVolDown, NUMBER_OF_REPEATS);
-#else
     Serial.println(F("Sending from normal memory"));
     irsend.sendPronto(yamahaVolDown, NUMBER_OF_REPEATS);
-#endif
 
     delay(2000);
-    Serial.println(F("Sending the NEC from PROGMEM using the F()-form: address 0x5, data 0x1A"));
+    Serial.println(F("Sending the NEC using the F()-form: address 0x5, data 0x1A"));
     irsend.sendPronto(F("0000 006C 0022 0002 015B 00AD " /* Pronto header + start bit */
             "0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 " /* Lower address byte */
             "0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 " /* Upper address byte (inverted at 8 bit mode) */