тесты с приемом данных. работаем из ram, в обработчике прерываний только нужные сейчас прерывания. все функции в модуле SS по максимуму заменены на дефайны для ускорения. в таких парниковых условиях работает и прием, и отправка нескольких байт до 115200 включительно

cores/arduino/mik32/shared/ldscripts/ram.ld

@@ -10,33 +10,49 @@ MEMORY {
 }
 
 STACK_SIZE = 1024;
+HEAP_SIZE = 1024;
 
 CL_SIZE = 16;
 
 SECTIONS {
     .text ORIGIN(ram) : {
         PROVIDE(__TEXT_START__ = .);
-        *crt0.o(.text .text.*)
+        *crt0.S.o(.text .text.*)
         *(.text.smallsysteminit)
         *(.text.SmallSystemInit)
         . = ORIGIN(ram) + 0xC0;
-        KEEP(*crt0.o(.trap_text))
+        KEEP(*crt0.S.o(.trap_text))
 
         *(.text)
         *(.text.*)
         *(.rodata)
         *(.rodata.*)      
         . = ALIGN(CL_SIZE);
-        PROVIDE(__TEXT_END__ = .);
     } >ram 
 
+    .init_array (READONLY) :
+	{
+	  PROVIDE_HIDDEN (__init_array_start = .);
+	  KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+	  KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+	  PROVIDE_HIDDEN (__init_array_end = .);
+	  
+	  PROVIDE_HIDDEN (__fini_array_start = .);
+	  KEEP(*(SORT_BY_INIT_PRIORITY(.fini_array.*)))
+	  KEEP(*(.fini_array))
+	  PROVIDE_HIDDEN (__fini_array_end   = .); 
+		
+	  PROVIDE(__TEXT_END__ = .);
+	} >ram AT>ram 
+
     .data : 
     AT( __TEXT_END__ ) {
         PROVIDE(__DATA_START__ = .);
         _gp = .;
         *(.srodata.cst16) *(.srodata.cst8) *(.srodata.cst4) *(.srodata.cst2) *(.srodata*)
-        *(.sdata .sdata.* .gnu.linkonce.s.*)
+        *(.sdata .sdata.* .sdata* .sdata*.* .gnu.linkonce.s.*)
         *(.data .data.*)
+        *(.ramfunc) 
         . = ALIGN(CL_SIZE);
     } >ram 
 
@@ -72,12 +88,19 @@ SECTIONS {
         PROVIDE(__BSS_END__ = .);
     } >ram
 
+    .heap : {
+        PROVIDE(__heap_start = .);
+        . += HEAP_SIZE;
+        . = ALIGN(CL_SIZE);
+        PROVIDE(__heap_end = .);
+    } >ram
+
     _end = .;
     PROVIDE(__end = .);
 
     /* End of uninitalized data segement */
 
-    .stack ORIGIN(ram) + LENGTH(ram) - STACK_SIZE : {
+    .stack ORIGIN(ram) + LENGTH(ram) - STACK_SIZE: {
         FILL(0);
         PROVIDE(__STACK_START__ = .);
         . += STACK_SIZE;

cores/arduino/trap_handler.c

@@ -1,5 +1,8 @@
 #include "mik32_hal_irq.h" 
 
+#include "mik32_hal_gpio.h"
+
+
 // isr functions
 extern void serial_handler_wrapper(uint8_t uartNumInt);
 extern void gpio_interrupts_handler(void);
@@ -13,6 +16,7 @@ extern void softSerial_handler_wrapper(void);
 // ---------------------------------------------- //
 void trap_handler(void)
 {
+    ((GPIO_0)->SET = (GPIO_PIN_8));
     // gpio interrupt
     if (EPIC_CHECK_GPIO_IRQ())
         // gpio_interrupts_handler();
@@ -22,18 +26,19 @@ void trap_handler(void)
     if (EPIC_CHECK_TIMER16_1())
         tone_interrupt_handler();
 
-    // uart0 interrupt
-    if (EPIC_CHECK_UART_0())
-        serial_handler_wrapper(0);
+    // // uart0 interrupt
+    // if (EPIC_CHECK_UART_0())
+    //     serial_handler_wrapper(0);
 
-    // uart1 interrupt
-    if (EPIC_CHECK_UART_1())
-        serial_handler_wrapper(1);
+    // // uart1 interrupt
+    // if (EPIC_CHECK_UART_1())
+    //     serial_handler_wrapper(1);
         
-    // i2c interrupt
-    if (EPIC_CHECK_I2C_1())
-        wire_handler_wrapper();
+    // // i2c interrupt
+    // if (EPIC_CHECK_I2C_1())
+    //     wire_handler_wrapper();
 
     // reset all interrupts
     HAL_EPIC_Clear(0xFFFFFFFF);
+    ((GPIO_0)->CLEAR = (GPIO_PIN_8));
 }

libraries/SoftwareSerial/src/SoftwareSerial.cpp

@@ -32,7 +32,9 @@ http://arduiniana.org.
 #define GPIO_SET_PIN(GPIO_x, pin)     ((GPIO_x)->SET = (pin))
 #define GPIO_CLEAR_PIN(GPIO_x, pin)   ((GPIO_x)->CLEAR = (pin))
 #define GPIO_READ_PIN(GPIO_x, pin)    (((GPIO_x)->SET & (pin)) != (uint32_t)GPIO_PIN_LOW ? GPIO_PIN_HIGH : GPIO_PIN_LOW)
-
+#define GPIO_IRQ_LINE_ENABLE(lineMask)    ( GPIO_IRQ->ENABLE_SET = (1 << (lineMask >> GPIO_IRQ_LINE_S)) )
+#define GPIO_IRQ_LINE_DISABLE(lineMask)   ( GPIO_IRQ->ENABLE_CLEAR = (1 << (lineMask >> GPIO_IRQ_LINE_S)) )
+#define GPIO_IRQ_CLEAR_ALL()              (GPIO_IRQ->CLEAR = 0b11111111)
 // --------- TO LL ---------
 
 
@@ -48,9 +50,12 @@ volatile uint8_t SoftwareSerial::_receive_buffer_head = 0;
 // function placed in ram. Should not call other function placed in flash
 void SoftwareSerial::tunedDelay(uint32_t delayTicks) 
 { 
+  if (delayTicks > 1)
+  {
     uint64_t startTicks = SYSTICK_GET_TICKS();
     while ((SYSTICK_GET_TICKS() - startTicks) < delayTicks)
       ;
+  }
 }
 
 // This function sets the current object as the "listening"
@@ -96,17 +101,17 @@ void SoftwareSerial::recv()
   uint8_t data = 0;
   // If RX line is high, then we don't see any start bit
   // so interrupt is probably not for us
-  if (_inverse_logic ? rx_pin_read() : !rx_pin_read())
+  bool rxState = (bool)GPIO_READ_PIN((GPIO_TypeDef *)_receivePortRegister, (HAL_PinsTypeDef)_receiveBitMask);
+  if (_inverse_logic ? rxState : !rxState)
   {
-    GPIO_SET_PIN(GPIO_0, GPIO_PIN_8);
-    GPIO_CLEAR_PIN(GPIO_0, GPIO_PIN_1);
+
     // Disable further interrupts during reception, this prevents
     // triggering another interrupt directly after we return, which can
     // cause problems at higher baudrates.
-    setRxIntMsk(false);
+    setRxIntMsk(false); // __always_inline__
 
     // Wait approximately 1/2 of a bit width to "center" the sample
-    tunedDelay(_rx_delay_centering);
+    tunedDelay(_rx_delay_centering); // __always_inline__
     GPIO_0->OUTPUT_ ^= GPIO_PIN_1;
 
     // Read each of the 8 bits
@@ -117,7 +122,7 @@ void SoftwareSerial::recv()
       
       GPIO_0->OUTPUT_ ^= GPIO_PIN_1;
 
-      if (rx_pin_read())
+      if (GPIO_READ_PIN((GPIO_TypeDef *)_receivePortRegister, (HAL_PinsTypeDef)_receiveBitMask))
         data |= 0x80;
     }
 
@@ -143,9 +148,9 @@ void SoftwareSerial::recv()
 
     // Re-enable interrupts when we're sure to be inside the stop bit
     setRxIntMsk(true);
-    GPIO_CLEAR_PIN(GPIO_0, GPIO_PIN_8);
+    
   }
-  HAL_GPIO_ClearInterrupts();
+  GPIO_IRQ_CLEAR_ALL();
 }
 
 uint8_t SoftwareSerial::rx_pin_read()
@@ -249,22 +254,33 @@ void SoftwareSerial::begin(long speed)
     // We want to have a total delay of 1.5 bit time from start bit. 
     // Inside the loop, we already wait for 1 bit time, so here we 
     // wait for 0.5 bit time
-    _rx_delay_centering = subtract_cap(bit_delay / 2, 750);
+    // _rx_delay_centering = subtract_cap(bit_delay / 2, 750); // spifi
+      _rx_delay_centering = subtract_cap(bit_delay / 2, 315); // ram
 
     // 1 bit time
-    _rx_delay_intrabit = subtract_cap(bit_delay, 200);
+    // _rx_delay_intrabit = subtract_cap(bit_delay, 200); // spifi
+    _rx_delay_intrabit = subtract_cap(bit_delay, 60);  // ram
 
     // This delay aims at 3/4 of a bit time, meaning the end of the
     // delay will be at 1/4th of the stopbit. This allows some extra
     // time for ISR cleanup, which makes 115200 baud at 16Mhz work more
     // reliably
-    _rx_delay_stopbit = subtract_cap(bit_delay * 3 / 4, 950);
+    // _rx_delay_stopbit = subtract_cap(bit_delay * 3 / 4, 950); // spifi     
+    _rx_delay_stopbit = subtract_cap(bit_delay * 3 / 4, 142); // ram
+    
+    if (speed==115200)
+    {
+      _rx_delay_intrabit = subtract_cap(_rx_delay_intrabit, 10);
+      _rx_delay_stopbit+=30;
+    }
 
     // Save start bit polarity - low to high if _inverse_logic
     _int_mode = _inverse_logic ? (uint8_t)GPIO_INT_MODE_RISING : (uint8_t)GPIO_INT_MODE_FALLING;
     // Save gpio_mux and gpio_line for on/off interrupts
     _int_maskMux = digitalPinToGpioIntMux(_receivePin);   // gpio mux value
     _int_maskLine = digitalPinToGpioIntLine(_receivePin); // gpio irq line value
+    HAL_GPIO_InitInterruptLine((HAL_GPIO_Line_Config) _int_maskMux, (HAL_GPIO_InterruptMode)_int_mode);
+    GPIO_IRQ_LINE_DISABLE(_int_maskLine); // turn off int
     HAL_EPIC_MaskEdgeSet(HAL_EPIC_GPIO_IRQ_MASK);         // turn on the mask in EPIC
   }
   else
@@ -281,11 +297,11 @@ void SoftwareSerial::begin(long speed)
 void SoftwareSerial::setRxIntMsk(bool enable)
 {
     if (enable)
-      // enable line interrupt
-      HAL_GPIO_InitInterruptLine((HAL_GPIO_Line_Config)_int_maskMux, (HAL_GPIO_InterruptMode)_int_mode);
+      // enable interrupt line 
+      GPIO_IRQ_LINE_ENABLE(_int_maskLine);
     else
-      // disable line interrupt
-      HAL_GPIO_DeInitInterruptLine((HAL_GPIO_Line)_int_maskLine);
+      // disable interrupt line 
+      GPIO_IRQ_LINE_DISABLE(_int_maskLine);
 }
 
 void SoftwareSerial::end()

platform.txt

@@ -18,7 +18,8 @@ compiler.MIK32_Amur.extra_include= "-I{build.core.path}/avr/" "-I{build.core.pat
 compiler.define="-DMCU_{build.mcu}" "-DF_CPU={build.f_cpu}" "-DARDUINO={runtime.ide.version}" "-DARDUINO_{build.board}" "-DARDUINO_ARCH_{build.arch}" "-DMIK32V2" "-D__ELBEAR_ACE_UNO__" "-D__RISC_V__" "-D__ARDUINO_ARC__" "-D__CPU_ARC__"
 
 build.flags.optimize=-Os
-build.ldscript=spifi_cpp.ld
+# build.ldscript=spifi_cpp.ld
+build.ldscript=ram.ld
 
 # Compiler flags
 compiler.warning_flags=-Wunused -Wuninitialized