v0.5.0
- добавлена поддержка платы ELBEAR ACE-NANO; - добавлена поддержка плат ELSOMIK OEM и SE; - добавлена возможность работы в режиме отладки для всех плат, входящих в состав пакета. Доступно для версии ArduinoIDE 2 и выше; - добавлена поддержка библиотеки FreeRTOS; - добавлена поддержка библиотеки IRremote; - добавлена поддержка библиотеки OneWire; - добавлена поддержка аппаратного I2C0 для плат START-MIK32 и ELSOMIK. Для работы с ним доступен экземпляр класса Wire1; - добавлена поддержка аппаратного SPI0 для всех плат, входящих в пакет. Для работы с ним доступен экземпляр класса SPI1; - увеличено быстродействие функций digitalWrite, digitalRead; - исправлены известные ошибки. Co-authored-by: KlassenTS <klassen@elron.tech> Co-committed-by: KlassenTS <klassen@elron.tech>
This commit was merged in pull request #19.
This commit is contained in:
klassents authored and 
klassents committed
1 parent
de1f0d7fda
commit
1c8e06634c
211 files changed
+97525
-591
No files matched your search
@@ -0,0 +1,349 @@
|
||||
/*
|
||||
* PinDefinitionsAndMore.h
|
||||
*
|
||||
* Contains pin definitions for IRremote examples for various platforms
|
||||
* as well as definitions for feedback LED and tone() and includes
|
||||
*
|
||||
* Copyright (C) 2021-2023 Armin Joachimsmeyer
|
||||
* armin.joachimsmeyer@gmail.com
|
||||
*
|
||||
* This file is part of IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
|
||||
*
|
||||
* Arduino-IRremote is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
* See the GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
|
||||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* Pin mapping table for different platforms
|
||||
*
|
||||
* Platform IR input IR output Tone Core/Pin schema
|
||||
* --------------------------------------------------------------
|
||||
* DEFAULT/AVR 2 3 4 Arduino
|
||||
* ATtinyX5 0|PB0 4|PB4 3|PB3 ATTinyCore
|
||||
* ATtiny167 3|PA3 2|PA2 7|PA7 ATTinyCore
|
||||
* ATtiny167 9|PA3 8|PA2 5|PA7 Digispark original core
|
||||
* ATtiny84 |PB2 |PA4 |PA3 ATTinyCore
|
||||
* ATtiny88 3|PD3 4|PD4 9|PB1 ATTinyCore
|
||||
* ATtiny3217 18|PA1 19|PA2 20|PA3 MegaTinyCore
|
||||
* ATtiny1604 2 3|PA5 %
|
||||
* ATtiny816 14|PA1 16|PA3 1|PA5 MegaTinyCore
|
||||
* ATtiny1614 8|PA1 10|PA3 1|PA5 MegaTinyCore
|
||||
* SAMD21 3 4 5
|
||||
* ESP8266 14|D5 12|D6 %
|
||||
* ESP32 15 4 27
|
||||
* ESP32-C3 2 3 4
|
||||
* BluePill PA6 PA7 PA3
|
||||
* APOLLO3 11 12 5
|
||||
* RP2040 3|GPIO15 4|GPIO16 5|GPIO17
|
||||
*/
|
||||
//#define _IR_MEASURE_TIMING // For debugging purposes.
|
||||
|
||||
#if defined(__AVR__)
|
||||
#if defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) // Digispark board. For use with ATTinyCore.
|
||||
#include "ATtinySerialOut.hpp" // TX is at pin 2 - Available as Arduino library "ATtinySerialOut". Saves 700 bytes program memory and 70 bytes RAM for ATtinyCore.
|
||||
#define IR_RECEIVE_PIN PIN_PB0
|
||||
#define IR_SEND_PIN PIN_PB4 // Pin 2 is serial output with ATtinySerialOut. Pin 1 is internal LED and Pin3 is USB+ with pullup on Digispark board.
|
||||
#define TONE_PIN PIN_PB3
|
||||
#define _IR_TIMING_TEST_PIN PIN_PB3
|
||||
|
||||
# elif defined(__AVR_ATtiny87__) || defined(__AVR_ATtiny167__) // Digispark pro board
|
||||
#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut"
|
||||
// For ATtiny167 Pins PB6 and PA3 are usable as interrupt source.
|
||||
# if defined(ARDUINO_AVR_DIGISPARKPRO)
|
||||
// For use with Digispark original core
|
||||
#define IR_RECEIVE_PIN 9 // PA3 - on Digispark board labeled as pin 9
|
||||
//#define IR_RECEIVE_PIN 14 // PB6 / INT0 is connected to USB+ on DigisparkPro boards
|
||||
#define IR_SEND_PIN 8 // PA2 - on Digispark board labeled as pin 8
|
||||
#define TONE_PIN 5 // PA7 - on Digispark board labeled as pin 5
|
||||
#define _IR_TIMING_TEST_PIN 10 // PA4
|
||||
# else
|
||||
// For use with ATTinyCore
|
||||
#define IR_RECEIVE_PIN PIN_PA3 // On Digispark board labeled as pin 9 - INT0 is connected to USB+ on DigisparkPro boards
|
||||
#define IR_SEND_PIN PIN_PA2 // On Digispark board labeled as pin 8
|
||||
#define TONE_PIN PIN_PA7 // On Digispark board labeled as pin 5
|
||||
# endif
|
||||
|
||||
# elif defined(__AVR_ATtiny84__) // For use with ATTinyCore
|
||||
#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut". Saves 128 bytes program memory.
|
||||
#define IR_RECEIVE_PIN PIN_PB2 // INT0
|
||||
#define IR_SEND_PIN PIN_PA4
|
||||
#define TONE_PIN PIN_PA3
|
||||
#define _IR_TIMING_TEST_PIN PIN_PA5
|
||||
|
||||
# elif defined(__AVR_ATtiny88__) // MH-ET Tiny88 board. For use with ATTinyCore.
|
||||
#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut". Saves 128 bytes program memory.
|
||||
// Pin 6 is TX, pin 7 is RX
|
||||
#define IR_RECEIVE_PIN PIN_PD3 // 3 - INT1
|
||||
#define IR_SEND_PIN PIN_PD4 // 4
|
||||
#define TONE_PIN PIN_PB1 // 9
|
||||
#define _IR_TIMING_TEST_PIN PIN_PB0 // 8
|
||||
|
||||
# elif defined(__AVR_ATtiny1616__) || defined(__AVR_ATtiny3216__) || defined(__AVR_ATtiny3217__) // For use with megaTinyCore
|
||||
// Tiny Core Dev board
|
||||
// https://www.tindie.com/products/xkimi/tiny-core-16-dev-board-attiny1616/ - Out of Stock
|
||||
// https://www.tindie.com/products/xkimi/tiny-core-32-dev-board-attiny3217/ - Out of Stock
|
||||
#define IR_RECEIVE_PIN PIN_PA1 // use 18 instead of PIN_PA1 for TinyCore32
|
||||
#define IR_SEND_PIN PIN_PA2 // 19
|
||||
#define TONE_PIN PIN_PA3 // 20
|
||||
#define APPLICATION_PIN PIN_PA0 // 0
|
||||
#undef LED_BUILTIN // No LED available on the TinyCore 32 board, take the one on the programming board which is connected to the DAC output
|
||||
#define LED_BUILTIN PIN_PA6 // use 2 instead of PIN_PA6 for TinyCore32
|
||||
|
||||
# elif defined(__AVR_ATtiny816__) // For use with megaTinyCore
|
||||
#define IR_RECEIVE_PIN PIN_PA1 // 14
|
||||
#define IR_SEND_PIN PIN_PA1 // 16
|
||||
#define TONE_PIN PIN_PA5 // 1
|
||||
#define APPLICATION_PIN PIN_PA4 // 0
|
||||
#undef LED_BUILTIN // No LED available, take the one which is connected to the DAC output
|
||||
#define LED_BUILTIN PIN_PB5 // 4
|
||||
|
||||
# elif defined(__AVR_ATtiny1614__) // For use with megaTinyCore
|
||||
#define IR_RECEIVE_PIN PIN_PA1 // 8
|
||||
#define IR_SEND_PIN PIN_PA3 // 10
|
||||
#define TONE_PIN PIN_PA5 // 1
|
||||
#define APPLICATION_PIN PIN_PA4 // 0
|
||||
|
||||
# elif defined(__AVR_ATtiny1604__) // For use with megaTinyCore
|
||||
#define IR_RECEIVE_PIN PIN_PA6 // 2 - To be compatible with interrupt example, pin 2 is chosen here.
|
||||
#define IR_SEND_PIN PIN_PA7 // 3
|
||||
#define APPLICATION_PIN PIN_PB2 // 5
|
||||
|
||||
#define tone(...) void() // Define as void, since TCB0_INT_vect is also used by tone()
|
||||
#define noTone(a) void()
|
||||
#define TONE_PIN 42 // Dummy for examples using it
|
||||
|
||||
# elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
|
||||
|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
|
||||
|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
|
||||
|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
|
||||
|| defined(__AVR_ATmega164P__) || defined(__AVR_ATmega32__) \
|
||||
|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega8535__) \
|
||||
|| defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) \
|
||||
|| defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) \
|
||||
|| defined(__AVR_ATmega8515__) || defined(__AVR_ATmega162__)
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 13
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
|
||||
# else // Default as for ATmega328 like on Uno, Nano, Leonardo, Teensy 2.0 etc.
|
||||
#define IR_RECEIVE_PIN 2 // To be compatible with interrupt example, pin 2 is chosen here.
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
|
||||
# if defined(ARDUINO_AVR_PROMICRO) // Sparkfun Pro Micro is __AVR_ATmega32U4__ but has different external circuit
|
||||
// We have no built in LED at pin 13 -> reuse RX LED
|
||||
#undef LED_BUILTIN
|
||||
#define LED_BUILTIN LED_BUILTIN_RX
|
||||
# endif
|
||||
# endif // defined(__AVR_ATtiny25__)...
|
||||
|
||||
#elif defined(ARDUINO_ARCH_RENESAS_UNO) // Uno R4
|
||||
// To be compatible with Uno R3.
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
|
||||
#elif defined(ESP8266)
|
||||
#define FEEDBACK_LED_IS_ACTIVE_LOW // The LED on my board (D4) is active LOW
|
||||
#define IR_RECEIVE_PIN 14 // D5
|
||||
#define IR_SEND_PIN 12 // D6 - D4/pin 2 is internal LED
|
||||
#define _IR_TIMING_TEST_PIN 2 // D4
|
||||
#define APPLICATION_PIN 13 // D7
|
||||
|
||||
#define tone(...) void() // tone() inhibits receive timer
|
||||
#define noTone(a) void()
|
||||
#define TONE_PIN 42 // Dummy for examples using it#
|
||||
|
||||
#elif defined(ARDUINO_NOLOGO_ESP32C3_SUPER_MINI)
|
||||
#define FEEDBACK_LED_IS_ACTIVE_LOW // The LED on my board (D8) is active LOW
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 10
|
||||
|
||||
#elif defined(CONFIG_IDF_TARGET_ESP32C3) || defined(ARDUINO_ESP32C3_DEV)
|
||||
#define NO_LED_FEEDBACK_CODE // The WS2812 on pin 8 of AI-C3 board crashes if used as receive feedback LED, other I/O pins are working...
|
||||
#define IR_RECEIVE_PIN 6
|
||||
#define IR_SEND_PIN 7
|
||||
#define TONE_PIN 10
|
||||
#define APPLICATION_PIN 18
|
||||
|
||||
#elif defined(ESP32)
|
||||
#include <Arduino.h>
|
||||
|
||||
// tone() is included in ESP32 core since 2.0.2
|
||||
#if !defined(ESP_ARDUINO_VERSION_VAL)
|
||||
#define ESP_ARDUINO_VERSION_VAL(major, minor, patch) 12345678
|
||||
#endif
|
||||
#if ESP_ARDUINO_VERSION <= ESP_ARDUINO_VERSION_VAL(2, 0, 2)
|
||||
#define TONE_LEDC_CHANNEL 1 // Using channel 1 makes tone() independent of receiving timer -> No need to stop receiving timer.
|
||||
void tone(uint8_t aPinNumber, unsigned int aFrequency){
|
||||
ledcAttachPin(aPinNumber, TONE_LEDC_CHANNEL);
|
||||
ledcWriteTone(TONE_LEDC_CHANNEL, aFrequency);
|
||||
}
|
||||
void tone(uint8_t aPinNumber, unsigned int aFrequency, unsigned long aDuration){
|
||||
ledcAttachPin(aPinNumber, TONE_LEDC_CHANNEL);
|
||||
ledcWriteTone(TONE_LEDC_CHANNEL, aFrequency);
|
||||
delay(aDuration);
|
||||
ledcWriteTone(TONE_LEDC_CHANNEL, 0);
|
||||
}
|
||||
void noTone(uint8_t aPinNumber){
|
||||
ledcWriteTone(TONE_LEDC_CHANNEL, 0);
|
||||
}
|
||||
#endif // ESP_ARDUINO_VERSION <= ESP_ARDUINO_VERSION_VAL(2, 0, 2)
|
||||
|
||||
#define IR_RECEIVE_PIN 15 // D15
|
||||
#define IR_SEND_PIN 4 // D4
|
||||
#define TONE_PIN 27 // D27 25 & 26 are DAC0 and 1
|
||||
#define APPLICATION_PIN 16 // RX2 pin
|
||||
|
||||
#elif defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_STM32F1) // BluePill
|
||||
// Timer 3 blocks PA6, PA7, PB0, PB1 for use by Servo or tone()
|
||||
#define IR_RECEIVE_PIN PA6
|
||||
#define IR_RECEIVE_PIN_STRING "PA6"
|
||||
#define IR_SEND_PIN PA7
|
||||
#define IR_SEND_PIN_STRING "PA7"
|
||||
#define TONE_PIN PA3
|
||||
#define _IR_TIMING_TEST_PIN PA5
|
||||
#define APPLICATION_PIN PA2
|
||||
#define APPLICATION_PIN_STRING "PA2"
|
||||
# if defined(ARDUINO_GENERIC_STM32F103C) || defined(ARDUINO_BLUEPILL_F103C8)
|
||||
// BluePill LED is active low
|
||||
#define FEEDBACK_LED_IS_ACTIVE_LOW
|
||||
# endif
|
||||
|
||||
#elif defined(ARDUINO_ARCH_APOLLO3) // Sparkfun Apollo boards
|
||||
#define IR_RECEIVE_PIN 11
|
||||
#define IR_SEND_PIN 12
|
||||
#define TONE_PIN 5
|
||||
|
||||
#elif defined(ARDUINO_ARCH_MBED) && defined(ARDUINO_ARCH_MBED_NANO) // Arduino Nano 33 BLE and Arduino Nano Connect layout for MBED
|
||||
// Must be before ARDUINO_ARCH_RP2040, since it is the layout for the MBED core of Arduino Nano Connect
|
||||
#define IR_RECEIVE_PIN 3 // GPIO15 Start with pin 3 since pin 2|GPIO25 is connected to LED on Pi pico
|
||||
#define IR_SEND_PIN 4 // GPIO16
|
||||
#define TONE_PIN 5
|
||||
#define APPLICATION_PIN 6
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 7 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 8
|
||||
|
||||
#elif defined(ARDUINO_ARCH_RP2040) // Arduino Nano Connect, Pi Pico with arduino-pico core https://github.com/earlephilhower/arduino-pico
|
||||
#define IR_RECEIVE_PIN 15 // GPIO15 to be compatible with the Arduino Nano RP2040 Connect (pin3)
|
||||
#define IR_SEND_PIN 16 // GPIO16
|
||||
#define TONE_PIN 17
|
||||
#define APPLICATION_PIN 18
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 19 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 20
|
||||
|
||||
// If you program the Nano RP2040 Connect with this core, then you must redefine LED_BUILTIN
|
||||
// and use the external reset with 1 kOhm to ground to enter UF2 mode
|
||||
#undef LED_BUILTIN
|
||||
#define LED_BUILTIN 6
|
||||
|
||||
#elif defined(PARTICLE) // !!!UNTESTED!!!
|
||||
#define IR_RECEIVE_PIN A4
|
||||
#define IR_SEND_PIN A5 // Particle supports multiple pins
|
||||
|
||||
#define LED_BUILTIN D7
|
||||
|
||||
/*
|
||||
* 4 times the same (default) layout for easy adaption in the future
|
||||
*/
|
||||
#elif defined(TEENSYDUINO) // Teensy 2.0 is handled at default for ATmega328 like on Uno, Nano, Leonardo etc.
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
|
||||
#elif defined(ARDUINO_ARCH_MBED) // Arduino Nano 33 BLE
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
|
||||
#elif defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_ARCH_SAM)
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
|
||||
#if !defined(ARDUINO_SAMD_ADAFRUIT) && !defined(ARDUINO_SEEED_XIAO_M0)
|
||||
// On the Zero and others we switch explicitly to SerialUSB
|
||||
#define Serial SerialUSB
|
||||
#endif
|
||||
|
||||
// Definitions for the Chinese SAMD21 M0-Mini clone, which has no led connected to D13/PA17.
|
||||
// Attention!!! D2 and D4 are swapped on these boards!!!
|
||||
// If you connect the LED, it is on pin 24/PB11. In this case activate the next two lines.
|
||||
//#undef LED_BUILTIN
|
||||
//#define LED_BUILTIN 24 // PB11
|
||||
// As an alternative you can choose pin 25, it is the RX-LED pin (PB03), but active low.In this case activate the next 3 lines.
|
||||
//#undef LED_BUILTIN
|
||||
//#define LED_BUILTIN 25 // PB03
|
||||
//#define FEEDBACK_LED_IS_ACTIVE_LOW // The RX LED on the M0-Mini is active LOW
|
||||
|
||||
#elif defined (NRF51) // BBC micro:bit
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define APPLICATION_PIN 1
|
||||
#define _IR_TIMING_TEST_PIN 4
|
||||
|
||||
#define tone(...) void() // no tone() available
|
||||
#define noTone(a) void()
|
||||
#define TONE_PIN 42 // Dummy for examples using it
|
||||
|
||||
#else
|
||||
#warning Board / CPU is not detected using pre-processor symbols -> using default values, which may not fit. Please extend PinDefinitionsAndMore.h.
|
||||
// Default valued for unidentified boards
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
#endif // defined(ESP8266)
|
||||
|
||||
#if defined(ESP32) || defined(ARDUINO_ARCH_RP2040) || defined(PARTICLE) || defined(ARDUINO_ARCH_MBED)
|
||||
#define SEND_PWM_BY_TIMER // We do not have pin restrictions for this CPU's, so lets use the hardware PWM for send carrier signal generation
|
||||
#else
|
||||
# if defined(SEND_PWM_BY_TIMER)
|
||||
#undef IR_SEND_PIN // SendPin is determined by timer! This avoids warnings in IRremote.hpp and IRTimer.hpp
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#if !defined (FLASHEND)
|
||||
#define FLASHEND 0xFFFF // Dummy value for platforms where FLASHEND is not defined
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Helper macro for getting a macro definition as string
|
||||
*/
|
||||
#if !defined(STR_HELPER)
|
||||
#define STR_HELPER(x) #x
|
||||
#define STR(x) STR_HELPER(x)
|
||||
#endif
|
||||
@@ -0,0 +1,217 @@
|
||||
/*
|
||||
* SendBoseWaveDemo.cpp
|
||||
*
|
||||
* Prompt user for a code to send. Make sure your 940-950nm IR LED is
|
||||
* connected to the default digital output. Place your Bose Wave Radio
|
||||
* CD in the line of sight of your LED, and send commands!
|
||||
*
|
||||
* This file is part of Arduino-IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
|
||||
*
|
||||
************************************************************************************
|
||||
* MIT License
|
||||
*
|
||||
* Copyright (c) 2020 Thomas Koch - 2022 AJ converted to inverted bits
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is furnished
|
||||
* to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in all
|
||||
* copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
|
||||
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
|
||||
* CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
|
||||
* OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
||||
*
|
||||
************************************************************************************
|
||||
*/
|
||||
#include <Arduino.h>
|
||||
|
||||
/*
|
||||
* Helper macro for getting a macro definition as string
|
||||
*/
|
||||
#if !defined(STR_HELPER)
|
||||
#define STR_HELPER(x) #x
|
||||
#define STR(x) STR_HELPER(x)
|
||||
#endif
|
||||
|
||||
#if !defined(IR_SEND_PIN)
|
||||
#define IR_SEND_PIN 3 // P0_0
|
||||
#endif
|
||||
|
||||
#include <IRremote.hpp>
|
||||
|
||||
|
||||
|
||||
//......................................................................
|
||||
//
|
||||
// Bose Wave Radio CD Remote Control
|
||||
// |-------------------------------------|
|
||||
// | On/Off Sleep VolUp |
|
||||
// | Play/Pause Stop VolDown |
|
||||
// | FM AM Aux |
|
||||
// | Tune Down Tune Up Mute |
|
||||
// | 1 2 3 |
|
||||
// | 4 5 6 |
|
||||
// |-------------------------------------|
|
||||
#define BOSE_CMD_ON_OFF 0x00
|
||||
#define BOSE_CMD_MUTE 0x01
|
||||
#define BOSE_CMD_VOL_UP 0x02
|
||||
#define BOSE_CMD_VOL_DOWN 0x03
|
||||
#define BOSE_CMD_PRESET_6 0x04
|
||||
#define BOSE_CMD_SLEEP 0x05
|
||||
#define BOSE_CMD_FM 0x06
|
||||
#define BOSE_CMD_AUX 0x07
|
||||
#define BOSE_CMD_AM 0x08
|
||||
#define BOSE_CMD_PLAY_PAUSE 0x09
|
||||
#define BOSE_CMD_STOP 0x0A
|
||||
#define BOSE_CMD_TUNE_UP 0x0B
|
||||
#define BOSE_CMD_TUNE_DOWN 0x0C
|
||||
#define BOSE_CMD_PRESET_1 0x0D
|
||||
#define BOSE_CMD_PRESET_2 0x0E
|
||||
#define BOSE_CMD_PRESET_3 0x0F
|
||||
#define BOSE_CMD_PRESET_4 0x10
|
||||
#define BOSE_CMD_PRESET_5 0x11
|
||||
|
||||
// Codes for Wave Music System
|
||||
// https://github.com/Arduino-IRremote/Arduino-IRremote/blob/master/pictures/BoseWaveMusicSystem.jpg)
|
||||
//#define BOSE_CMD_ON_OFF 0x4C
|
||||
//#define BOSE_CMD_MUTE 0x01
|
||||
//#define BOSE_CMD_VOL_UP 0x03
|
||||
//#define BOSE_CMD_VOL_DOWN 0x02
|
||||
//#define BOSE_CMD_SLEEP 0x54
|
||||
//#define BOSE_CMD_FM_AM 0x06
|
||||
//#define BOSE_CMD_CD 0x53
|
||||
//#define BOSE_CMD_AUX 0x0F
|
||||
//#define BOSE_CMD_TRACK_BW 0x18
|
||||
//#define BOSE_CMD_TRACK_FW 0x19
|
||||
//#define BOSE_CMD_PLAY_PAUSE 0x1B
|
||||
//#define BOSE_CMD_STOP_EJECT 0x1A
|
||||
//#define BOSE_CMD_TUNE_UP 0x58
|
||||
//#define BOSE_CMD_TUNE_DOWN 0x57
|
||||
//#define BOSE_CMD_PRESET_1 0x07
|
||||
//#define BOSE_CMD_PRESET_2 0x08
|
||||
//#define BOSE_CMD_PRESET_3 0x09
|
||||
//#define BOSE_CMD_PRESET_4 0x0A
|
||||
//#define BOSE_CMD_PRESET_5 0x0B
|
||||
//#define BOSE_CMD_PRESET_6 0x0C
|
||||
//#define BOSE_CMD_TIME_MINUS 0x9E
|
||||
//#define BOSE_CMD_TIME_PLUS 0x24
|
||||
//#define BOSE_CMD_PLAY_MODE 0x21
|
||||
//#define BOSE_CMD_ALARM_ON_OFF 0x22
|
||||
//#define BOSE_CMD_ALARM_WAKE_TO 0x70
|
||||
//#define BOSE_CMD_ALARM_TIME 0x23
|
||||
// Different last 3 codes for Wave Sound Touch IV
|
||||
//#define BOSE_CMD_ALARM_1 0x22
|
||||
//#define BOSE_CMD_ALARM_2 0x62
|
||||
//#define BOSE_CMD_ALARM_SETUP 0xA2
|
||||
|
||||
bool sPrintMenu;
|
||||
void printMenu();
|
||||
|
||||
void setup() {
|
||||
pinMode(LED_BUILTIN, OUTPUT);
|
||||
|
||||
Serial.begin(9600);
|
||||
while (!Serial)
|
||||
; // Wait for Serial to become available. Is optimized away for some cores.
|
||||
|
||||
// Just to know which program is running on my Arduino
|
||||
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_IRREMOTE));
|
||||
|
||||
#if defined(IR_SEND_PIN)
|
||||
IrSender.begin(); // Start with IR_SEND_PIN as send pin and enable feedback LED at default feedback LED pin
|
||||
Serial.println(F("Send IR signals at pin " STR(IR_SEND_PIN)));
|
||||
#else
|
||||
uint8_t tSendPin = 3;
|
||||
IrSender.begin(tSendPin, ENABLE_LED_FEEDBACK, USE_DEFAULT_FEEDBACK_LED_PIN); // Specify send pin and enable feedback LED at default feedback LED pin
|
||||
// You can change send pin later with IrSender.setSendPin();
|
||||
|
||||
Serial.print(F("Send IR signals at pin "));
|
||||
Serial.println(tSendPin);
|
||||
#endif
|
||||
|
||||
sPrintMenu = true;
|
||||
}
|
||||
|
||||
void loop() {
|
||||
if (sPrintMenu) {
|
||||
sPrintMenu = false;
|
||||
printMenu();
|
||||
}
|
||||
int tSerialCommandCharacter;
|
||||
|
||||
if (Serial.available()) {
|
||||
tSerialCommandCharacter = Serial.read();
|
||||
sPrintMenu = true;
|
||||
if (tSerialCommandCharacter == -1) {
|
||||
Serial.print(F("available() was true, but no character read")); // should not happen
|
||||
} else if (tSerialCommandCharacter == 48) { // 0
|
||||
IrSender.sendBoseWave(BOSE_CMD_ON_OFF); // On/Off
|
||||
} else if (tSerialCommandCharacter == 49) { // 1
|
||||
IrSender.sendBoseWave(BOSE_CMD_VOL_UP); // Volume Up
|
||||
} else if (tSerialCommandCharacter == 50) { // 2
|
||||
IrSender.sendBoseWave(BOSE_CMD_VOL_DOWN); // Volume Down
|
||||
} else if (tSerialCommandCharacter == 51) { // 3
|
||||
IrSender.sendBoseWave(BOSE_CMD_TUNE_UP); // Tune Up
|
||||
} else if (tSerialCommandCharacter == 52) { // 4
|
||||
IrSender.sendBoseWave(BOSE_CMD_TUNE_DOWN); // Tune Down
|
||||
} else if (tSerialCommandCharacter == 53) { // 5
|
||||
IrSender.sendBoseWave(BOSE_CMD_AM); // AM
|
||||
} else if (tSerialCommandCharacter == 54) { // 6
|
||||
IrSender.sendBoseWave(BOSE_CMD_FM); // FM
|
||||
} else if (tSerialCommandCharacter == 55) { // 7
|
||||
IrSender.sendBoseWave(BOSE_CMD_PRESET_1); // Preset 1
|
||||
} else if (tSerialCommandCharacter == 56) { // 8
|
||||
IrSender.sendBoseWave(BOSE_CMD_PRESET_2); // Preset 2
|
||||
} else if (tSerialCommandCharacter == 57) { // 9
|
||||
IrSender.sendBoseWave(BOSE_CMD_PRESET_3); // Preset 3
|
||||
} else if (tSerialCommandCharacter == 97) { // a
|
||||
IrSender.sendBoseWave(BOSE_CMD_PRESET_4); // Preset 4
|
||||
} else if (tSerialCommandCharacter == 98) { // b
|
||||
IrSender.sendBoseWave(BOSE_CMD_PRESET_5); // Preset 5
|
||||
} else if (tSerialCommandCharacter == 99) { // c
|
||||
IrSender.sendBoseWave(BOSE_CMD_PRESET_6); // Preset 6
|
||||
} else if (tSerialCommandCharacter == 100) { // d
|
||||
IrSender.sendBoseWave(BOSE_CMD_MUTE); // Mute
|
||||
} else if (tSerialCommandCharacter == 101) { // e
|
||||
IrSender.sendBoseWave(BOSE_CMD_PLAY_PAUSE); // Pause
|
||||
} else if (tSerialCommandCharacter == 102) { // f
|
||||
IrSender.sendBoseWave(BOSE_CMD_STOP); // Stop
|
||||
} else if (tSerialCommandCharacter == 103) { // g
|
||||
IrSender.sendBoseWave(BOSE_CMD_AUX); // Aux
|
||||
} else if (tSerialCommandCharacter == 104) { // h
|
||||
IrSender.sendBoseWave(BOSE_CMD_SLEEP); // Sleep
|
||||
} else {
|
||||
sPrintMenu = false;
|
||||
}
|
||||
delay(300);
|
||||
}
|
||||
}
|
||||
|
||||
void printMenu() {
|
||||
Serial.println("0: On / Off");
|
||||
Serial.println("1: Volume Up");
|
||||
Serial.println("2: Volume Down");
|
||||
Serial.println("3: Tune Up");
|
||||
Serial.println("4: Tune Down");
|
||||
Serial.println("5: AM");
|
||||
Serial.println("6: FM");
|
||||
Serial.println("7: Preset 1");
|
||||
Serial.println("8: Preset 2");
|
||||
Serial.println("9: Preset 3");
|
||||
Serial.println("a: Preset 4");
|
||||
Serial.println("b: Preset 5");
|
||||
Serial.println("c: Preset 6");
|
||||
Serial.println("d: Mute");
|
||||
Serial.println("e: Play/Pause");
|
||||
Serial.println("f: Stop");
|
||||
Serial.println("g: Aux");
|
||||
Serial.println("h: Sleep");
|
||||
}
|
||||
Reference in new issue
Block a user