v0.5.0
- добавлена поддержка платы ELBEAR ACE-NANO; - добавлена поддержка плат ELSOMIK OEM и SE; - добавлена возможность работы в режиме отладки для всех плат, входящих в состав пакета. Доступно для версии ArduinoIDE 2 и выше; - добавлена поддержка библиотеки FreeRTOS; - добавлена поддержка библиотеки IRremote; - добавлена поддержка библиотеки OneWire; - добавлена поддержка аппаратного I2C0 для плат START-MIK32 и ELSOMIK. Для работы с ним доступен экземпляр класса Wire1; - добавлена поддержка аппаратного SPI0 для всех плат, входящих в пакет. Для работы с ним доступен экземпляр класса SPI1; - увеличено быстродействие функций digitalWrite, digitalRead; - исправлены известные ошибки. Co-authored-by: KlassenTS <klassen@elron.tech> Co-committed-by: KlassenTS <klassen@elron.tech>
This commit was merged in pull request #19.
This commit is contained in:
klassents authored and 
klassents committed
1 parent
de1f0d7fda
commit
1c8e06634c
211 files changed
+97525
-591
No files matched your search
@@ -0,0 +1,349 @@
|
||||
/*
|
||||
* PinDefinitionsAndMore.h
|
||||
*
|
||||
* Contains pin definitions for IRremote examples for various platforms
|
||||
* as well as definitions for feedback LED and tone() and includes
|
||||
*
|
||||
* Copyright (C) 2021-2023 Armin Joachimsmeyer
|
||||
* armin.joachimsmeyer@gmail.com
|
||||
*
|
||||
* This file is part of IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
|
||||
*
|
||||
* Arduino-IRremote is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
* See the GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/gpl.html>.
|
||||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* Pin mapping table for different platforms
|
||||
*
|
||||
* Platform IR input IR output Tone Core/Pin schema
|
||||
* --------------------------------------------------------------
|
||||
* DEFAULT/AVR 2 3 4 Arduino
|
||||
* ATtinyX5 0|PB0 4|PB4 3|PB3 ATTinyCore
|
||||
* ATtiny167 3|PA3 2|PA2 7|PA7 ATTinyCore
|
||||
* ATtiny167 9|PA3 8|PA2 5|PA7 Digispark original core
|
||||
* ATtiny84 |PB2 |PA4 |PA3 ATTinyCore
|
||||
* ATtiny88 3|PD3 4|PD4 9|PB1 ATTinyCore
|
||||
* ATtiny3217 18|PA1 19|PA2 20|PA3 MegaTinyCore
|
||||
* ATtiny1604 2 3|PA5 %
|
||||
* ATtiny816 14|PA1 16|PA3 1|PA5 MegaTinyCore
|
||||
* ATtiny1614 8|PA1 10|PA3 1|PA5 MegaTinyCore
|
||||
* SAMD21 3 4 5
|
||||
* ESP8266 14|D5 12|D6 %
|
||||
* ESP32 15 4 27
|
||||
* ESP32-C3 2 3 4
|
||||
* BluePill PA6 PA7 PA3
|
||||
* APOLLO3 11 12 5
|
||||
* RP2040 3|GPIO15 4|GPIO16 5|GPIO17
|
||||
*/
|
||||
//#define _IR_MEASURE_TIMING // For debugging purposes.
|
||||
|
||||
#if defined(__AVR__)
|
||||
#if defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) // Digispark board. For use with ATTinyCore.
|
||||
#include "ATtinySerialOut.hpp" // TX is at pin 2 - Available as Arduino library "ATtinySerialOut". Saves 700 bytes program memory and 70 bytes RAM for ATtinyCore.
|
||||
#define IR_RECEIVE_PIN PIN_PB0
|
||||
#define IR_SEND_PIN PIN_PB4 // Pin 2 is serial output with ATtinySerialOut. Pin 1 is internal LED and Pin3 is USB+ with pullup on Digispark board.
|
||||
#define TONE_PIN PIN_PB3
|
||||
#define _IR_TIMING_TEST_PIN PIN_PB3
|
||||
|
||||
# elif defined(__AVR_ATtiny87__) || defined(__AVR_ATtiny167__) // Digispark pro board
|
||||
#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut"
|
||||
// For ATtiny167 Pins PB6 and PA3 are usable as interrupt source.
|
||||
# if defined(ARDUINO_AVR_DIGISPARKPRO)
|
||||
// For use with Digispark original core
|
||||
#define IR_RECEIVE_PIN 9 // PA3 - on Digispark board labeled as pin 9
|
||||
//#define IR_RECEIVE_PIN 14 // PB6 / INT0 is connected to USB+ on DigisparkPro boards
|
||||
#define IR_SEND_PIN 8 // PA2 - on Digispark board labeled as pin 8
|
||||
#define TONE_PIN 5 // PA7 - on Digispark board labeled as pin 5
|
||||
#define _IR_TIMING_TEST_PIN 10 // PA4
|
||||
# else
|
||||
// For use with ATTinyCore
|
||||
#define IR_RECEIVE_PIN PIN_PA3 // On Digispark board labeled as pin 9 - INT0 is connected to USB+ on DigisparkPro boards
|
||||
#define IR_SEND_PIN PIN_PA2 // On Digispark board labeled as pin 8
|
||||
#define TONE_PIN PIN_PA7 // On Digispark board labeled as pin 5
|
||||
# endif
|
||||
|
||||
# elif defined(__AVR_ATtiny84__) // For use with ATTinyCore
|
||||
#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut". Saves 128 bytes program memory.
|
||||
#define IR_RECEIVE_PIN PIN_PB2 // INT0
|
||||
#define IR_SEND_PIN PIN_PA4
|
||||
#define TONE_PIN PIN_PA3
|
||||
#define _IR_TIMING_TEST_PIN PIN_PA5
|
||||
|
||||
# elif defined(__AVR_ATtiny88__) // MH-ET Tiny88 board. For use with ATTinyCore.
|
||||
#include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut". Saves 128 bytes program memory.
|
||||
// Pin 6 is TX, pin 7 is RX
|
||||
#define IR_RECEIVE_PIN PIN_PD3 // 3 - INT1
|
||||
#define IR_SEND_PIN PIN_PD4 // 4
|
||||
#define TONE_PIN PIN_PB1 // 9
|
||||
#define _IR_TIMING_TEST_PIN PIN_PB0 // 8
|
||||
|
||||
# elif defined(__AVR_ATtiny1616__) || defined(__AVR_ATtiny3216__) || defined(__AVR_ATtiny3217__) // For use with megaTinyCore
|
||||
// Tiny Core Dev board
|
||||
// https://www.tindie.com/products/xkimi/tiny-core-16-dev-board-attiny1616/ - Out of Stock
|
||||
// https://www.tindie.com/products/xkimi/tiny-core-32-dev-board-attiny3217/ - Out of Stock
|
||||
#define IR_RECEIVE_PIN PIN_PA1 // use 18 instead of PIN_PA1 for TinyCore32
|
||||
#define IR_SEND_PIN PIN_PA2 // 19
|
||||
#define TONE_PIN PIN_PA3 // 20
|
||||
#define APPLICATION_PIN PIN_PA0 // 0
|
||||
#undef LED_BUILTIN // No LED available on the TinyCore 32 board, take the one on the programming board which is connected to the DAC output
|
||||
#define LED_BUILTIN PIN_PA6 // use 2 instead of PIN_PA6 for TinyCore32
|
||||
|
||||
# elif defined(__AVR_ATtiny816__) // For use with megaTinyCore
|
||||
#define IR_RECEIVE_PIN PIN_PA1 // 14
|
||||
#define IR_SEND_PIN PIN_PA1 // 16
|
||||
#define TONE_PIN PIN_PA5 // 1
|
||||
#define APPLICATION_PIN PIN_PA4 // 0
|
||||
#undef LED_BUILTIN // No LED available, take the one which is connected to the DAC output
|
||||
#define LED_BUILTIN PIN_PB5 // 4
|
||||
|
||||
# elif defined(__AVR_ATtiny1614__) // For use with megaTinyCore
|
||||
#define IR_RECEIVE_PIN PIN_PA1 // 8
|
||||
#define IR_SEND_PIN PIN_PA3 // 10
|
||||
#define TONE_PIN PIN_PA5 // 1
|
||||
#define APPLICATION_PIN PIN_PA4 // 0
|
||||
|
||||
# elif defined(__AVR_ATtiny1604__) // For use with megaTinyCore
|
||||
#define IR_RECEIVE_PIN PIN_PA6 // 2 - To be compatible with interrupt example, pin 2 is chosen here.
|
||||
#define IR_SEND_PIN PIN_PA7 // 3
|
||||
#define APPLICATION_PIN PIN_PB2 // 5
|
||||
|
||||
#define tone(...) void() // Define as void, since TCB0_INT_vect is also used by tone()
|
||||
#define noTone(a) void()
|
||||
#define TONE_PIN 42 // Dummy for examples using it
|
||||
|
||||
# elif defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) \
|
||||
|| defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) \
|
||||
|| defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324A__) \
|
||||
|| defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega164A__) \
|
||||
|| defined(__AVR_ATmega164P__) || defined(__AVR_ATmega32__) \
|
||||
|| defined(__AVR_ATmega16__) || defined(__AVR_ATmega8535__) \
|
||||
|| defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) \
|
||||
|| defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) \
|
||||
|| defined(__AVR_ATmega8515__) || defined(__AVR_ATmega162__)
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 13
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
|
||||
# else // Default as for ATmega328 like on Uno, Nano, Leonardo, Teensy 2.0 etc.
|
||||
#define IR_RECEIVE_PIN 2 // To be compatible with interrupt example, pin 2 is chosen here.
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
|
||||
# if defined(ARDUINO_AVR_PROMICRO) // Sparkfun Pro Micro is __AVR_ATmega32U4__ but has different external circuit
|
||||
// We have no built in LED at pin 13 -> reuse RX LED
|
||||
#undef LED_BUILTIN
|
||||
#define LED_BUILTIN LED_BUILTIN_RX
|
||||
# endif
|
||||
# endif // defined(__AVR_ATtiny25__)...
|
||||
|
||||
#elif defined(ARDUINO_ARCH_RENESAS_UNO) // Uno R4
|
||||
// To be compatible with Uno R3.
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
|
||||
#elif defined(ESP8266)
|
||||
#define FEEDBACK_LED_IS_ACTIVE_LOW // The LED on my board (D4) is active LOW
|
||||
#define IR_RECEIVE_PIN 14 // D5
|
||||
#define IR_SEND_PIN 12 // D6 - D4/pin 2 is internal LED
|
||||
#define _IR_TIMING_TEST_PIN 2 // D4
|
||||
#define APPLICATION_PIN 13 // D7
|
||||
|
||||
#define tone(...) void() // tone() inhibits receive timer
|
||||
#define noTone(a) void()
|
||||
#define TONE_PIN 42 // Dummy for examples using it#
|
||||
|
||||
#elif defined(ARDUINO_NOLOGO_ESP32C3_SUPER_MINI)
|
||||
#define FEEDBACK_LED_IS_ACTIVE_LOW // The LED on my board (D8) is active LOW
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 10
|
||||
|
||||
#elif defined(CONFIG_IDF_TARGET_ESP32C3) || defined(ARDUINO_ESP32C3_DEV)
|
||||
#define NO_LED_FEEDBACK_CODE // The WS2812 on pin 8 of AI-C3 board crashes if used as receive feedback LED, other I/O pins are working...
|
||||
#define IR_RECEIVE_PIN 6
|
||||
#define IR_SEND_PIN 7
|
||||
#define TONE_PIN 10
|
||||
#define APPLICATION_PIN 18
|
||||
|
||||
#elif defined(ESP32)
|
||||
#include <Arduino.h>
|
||||
|
||||
// tone() is included in ESP32 core since 2.0.2
|
||||
#if !defined(ESP_ARDUINO_VERSION_VAL)
|
||||
#define ESP_ARDUINO_VERSION_VAL(major, minor, patch) 12345678
|
||||
#endif
|
||||
#if ESP_ARDUINO_VERSION <= ESP_ARDUINO_VERSION_VAL(2, 0, 2)
|
||||
#define TONE_LEDC_CHANNEL 1 // Using channel 1 makes tone() independent of receiving timer -> No need to stop receiving timer.
|
||||
void tone(uint8_t aPinNumber, unsigned int aFrequency){
|
||||
ledcAttachPin(aPinNumber, TONE_LEDC_CHANNEL);
|
||||
ledcWriteTone(TONE_LEDC_CHANNEL, aFrequency);
|
||||
}
|
||||
void tone(uint8_t aPinNumber, unsigned int aFrequency, unsigned long aDuration){
|
||||
ledcAttachPin(aPinNumber, TONE_LEDC_CHANNEL);
|
||||
ledcWriteTone(TONE_LEDC_CHANNEL, aFrequency);
|
||||
delay(aDuration);
|
||||
ledcWriteTone(TONE_LEDC_CHANNEL, 0);
|
||||
}
|
||||
void noTone(uint8_t aPinNumber){
|
||||
ledcWriteTone(TONE_LEDC_CHANNEL, 0);
|
||||
}
|
||||
#endif // ESP_ARDUINO_VERSION <= ESP_ARDUINO_VERSION_VAL(2, 0, 2)
|
||||
|
||||
#define IR_RECEIVE_PIN 15 // D15
|
||||
#define IR_SEND_PIN 4 // D4
|
||||
#define TONE_PIN 27 // D27 25 & 26 are DAC0 and 1
|
||||
#define APPLICATION_PIN 16 // RX2 pin
|
||||
|
||||
#elif defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_STM32F1) // BluePill
|
||||
// Timer 3 blocks PA6, PA7, PB0, PB1 for use by Servo or tone()
|
||||
#define IR_RECEIVE_PIN PA6
|
||||
#define IR_RECEIVE_PIN_STRING "PA6"
|
||||
#define IR_SEND_PIN PA7
|
||||
#define IR_SEND_PIN_STRING "PA7"
|
||||
#define TONE_PIN PA3
|
||||
#define _IR_TIMING_TEST_PIN PA5
|
||||
#define APPLICATION_PIN PA2
|
||||
#define APPLICATION_PIN_STRING "PA2"
|
||||
# if defined(ARDUINO_GENERIC_STM32F103C) || defined(ARDUINO_BLUEPILL_F103C8)
|
||||
// BluePill LED is active low
|
||||
#define FEEDBACK_LED_IS_ACTIVE_LOW
|
||||
# endif
|
||||
|
||||
#elif defined(ARDUINO_ARCH_APOLLO3) // Sparkfun Apollo boards
|
||||
#define IR_RECEIVE_PIN 11
|
||||
#define IR_SEND_PIN 12
|
||||
#define TONE_PIN 5
|
||||
|
||||
#elif defined(ARDUINO_ARCH_MBED) && defined(ARDUINO_ARCH_MBED_NANO) // Arduino Nano 33 BLE and Arduino Nano Connect layout for MBED
|
||||
// Must be before ARDUINO_ARCH_RP2040, since it is the layout for the MBED core of Arduino Nano Connect
|
||||
#define IR_RECEIVE_PIN 3 // GPIO15 Start with pin 3 since pin 2|GPIO25 is connected to LED on Pi pico
|
||||
#define IR_SEND_PIN 4 // GPIO16
|
||||
#define TONE_PIN 5
|
||||
#define APPLICATION_PIN 6
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 7 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 8
|
||||
|
||||
#elif defined(ARDUINO_ARCH_RP2040) // Arduino Nano Connect, Pi Pico with arduino-pico core https://github.com/earlephilhower/arduino-pico
|
||||
#define IR_RECEIVE_PIN 15 // GPIO15 to be compatible with the Arduino Nano RP2040 Connect (pin3)
|
||||
#define IR_SEND_PIN 16 // GPIO16
|
||||
#define TONE_PIN 17
|
||||
#define APPLICATION_PIN 18
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 19 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 20
|
||||
|
||||
// If you program the Nano RP2040 Connect with this core, then you must redefine LED_BUILTIN
|
||||
// and use the external reset with 1 kOhm to ground to enter UF2 mode
|
||||
#undef LED_BUILTIN
|
||||
#define LED_BUILTIN 6
|
||||
|
||||
#elif defined(PARTICLE) // !!!UNTESTED!!!
|
||||
#define IR_RECEIVE_PIN A4
|
||||
#define IR_SEND_PIN A5 // Particle supports multiple pins
|
||||
|
||||
#define LED_BUILTIN D7
|
||||
|
||||
/*
|
||||
* 4 times the same (default) layout for easy adaption in the future
|
||||
*/
|
||||
#elif defined(TEENSYDUINO) // Teensy 2.0 is handled at default for ATmega328 like on Uno, Nano, Leonardo etc.
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
|
||||
#elif defined(ARDUINO_ARCH_MBED) // Arduino Nano 33 BLE
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
|
||||
#elif defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_ARCH_SAM)
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
|
||||
#if !defined(ARDUINO_SAMD_ADAFRUIT) && !defined(ARDUINO_SEEED_XIAO_M0)
|
||||
// On the Zero and others we switch explicitly to SerialUSB
|
||||
#define Serial SerialUSB
|
||||
#endif
|
||||
|
||||
// Definitions for the Chinese SAMD21 M0-Mini clone, which has no led connected to D13/PA17.
|
||||
// Attention!!! D2 and D4 are swapped on these boards!!!
|
||||
// If you connect the LED, it is on pin 24/PB11. In this case activate the next two lines.
|
||||
//#undef LED_BUILTIN
|
||||
//#define LED_BUILTIN 24 // PB11
|
||||
// As an alternative you can choose pin 25, it is the RX-LED pin (PB03), but active low.In this case activate the next 3 lines.
|
||||
//#undef LED_BUILTIN
|
||||
//#define LED_BUILTIN 25 // PB03
|
||||
//#define FEEDBACK_LED_IS_ACTIVE_LOW // The RX LED on the M0-Mini is active LOW
|
||||
|
||||
#elif defined (NRF51) // BBC micro:bit
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define APPLICATION_PIN 1
|
||||
#define _IR_TIMING_TEST_PIN 4
|
||||
|
||||
#define tone(...) void() // no tone() available
|
||||
#define noTone(a) void()
|
||||
#define TONE_PIN 42 // Dummy for examples using it
|
||||
|
||||
#else
|
||||
#warning Board / CPU is not detected using pre-processor symbols -> using default values, which may not fit. Please extend PinDefinitionsAndMore.h.
|
||||
// Default valued for unidentified boards
|
||||
#define IR_RECEIVE_PIN 2
|
||||
#define IR_SEND_PIN 3
|
||||
#define TONE_PIN 4
|
||||
#define APPLICATION_PIN 5
|
||||
#define ALTERNATIVE_IR_FEEDBACK_LED_PIN 6 // E.g. used for examples which use LED_BUILDIN for example output.
|
||||
#define _IR_TIMING_TEST_PIN 7
|
||||
#endif // defined(ESP8266)
|
||||
|
||||
#if defined(ESP32) || defined(ARDUINO_ARCH_RP2040) || defined(PARTICLE) || defined(ARDUINO_ARCH_MBED)
|
||||
#define SEND_PWM_BY_TIMER // We do not have pin restrictions for this CPU's, so lets use the hardware PWM for send carrier signal generation
|
||||
#else
|
||||
# if defined(SEND_PWM_BY_TIMER)
|
||||
#undef IR_SEND_PIN // SendPin is determined by timer! This avoids warnings in IRremote.hpp and IRTimer.hpp
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#if !defined (FLASHEND)
|
||||
#define FLASHEND 0xFFFF // Dummy value for platforms where FLASHEND is not defined
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Helper macro for getting a macro definition as string
|
||||
*/
|
||||
#if !defined(STR_HELPER)
|
||||
#define STR_HELPER(x) #x
|
||||
#define STR(x) STR_HELPER(x)
|
||||
#endif
|
||||
@@ -0,0 +1,161 @@
|
||||
/*
|
||||
* ReceiveDump.cpp
|
||||
*
|
||||
* Dumps the received signal in different flavors.
|
||||
* Since the printing takes so much time (200 ms @115200 for NEC protocol, 70ms for NEC repeat),
|
||||
* repeat signals may be skipped or interpreted as UNKNOWN.
|
||||
*
|
||||
* This file is part of Arduino-IRremote https://github.com/Arduino-IRremote/Arduino-IRremote.
|
||||
*
|
||||
************************************************************************************
|
||||
* MIT License
|
||||
*
|
||||
* Copyright (c) 2020-2024 Armin Joachimsmeyer
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is furnished
|
||||
* to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in all
|
||||
* copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
|
||||
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
|
||||
* CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
|
||||
* OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
||||
*
|
||||
************************************************************************************
|
||||
*/
|
||||
#include <Arduino.h>
|
||||
|
||||
// #include "PinDefinitionsAndMore.h" // Define macros for input and output pin etc.
|
||||
/*
|
||||
* Helper macro for getting a macro definition as string
|
||||
*/
|
||||
#if !defined(STR_HELPER)
|
||||
#define STR_HELPER(x) #x
|
||||
#define STR(x) STR_HELPER(x)
|
||||
#endif
|
||||
|
||||
#define IR_RECEIVE_PIN 4 // P0_1
|
||||
|
||||
|
||||
#if !defined(RAW_BUFFER_LENGTH)
|
||||
// For air condition remotes it requires 750. Default is 200.
|
||||
#define RAW_BUFFER_LENGTH 730 // this allows usage of 16 bit raw buffer, for RECORD_GAP_MICROS > 20000
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
* MARK_EXCESS_MICROS is subtracted from all marks and added to all spaces before decoding,
|
||||
* to compensate for the signal forming of different IR receiver modules. See also IRremote.hpp line 142.
|
||||
*
|
||||
* You can change this value accordingly to the receiver module you use.
|
||||
* The required value can be derived from the timings printed here.
|
||||
* Keep in mind that the timings may change with the distance
|
||||
* between sender and receiver as well as with the ambient light intensity.
|
||||
*/
|
||||
#define MARK_EXCESS_MICROS 20 // Adapt it to your IR receiver module. 20 is recommended for the cheap VS1838 modules.
|
||||
|
||||
//#define RECORD_GAP_MICROS 12000 // Default is 8000. Activate it for some LG air conditioner protocols
|
||||
//#define DEBUG // Activate this for lots of lovely debug output from the decoders.
|
||||
|
||||
#include <IRremote.hpp>
|
||||
|
||||
//+=============================================================================
|
||||
// Configure the Arduino
|
||||
//
|
||||
void setup() {
|
||||
pinMode(LED_BUILTIN, OUTPUT);
|
||||
|
||||
Serial.begin(9600); // Status message will be sent to PC at 9600 baud
|
||||
while (!Serial)
|
||||
; // Wait for Serial to become available. Is optimized away for some cores.
|
||||
|
||||
// Just to know which program is running on my Arduino
|
||||
Serial.println(F("START " __FILE__ " from " __DATE__ "\r\nUsing library version " VERSION_IRREMOTE));
|
||||
|
||||
// Start the receiver and if not 3. parameter specified, take LED_BUILTIN pin from the internal boards definition as default feedback LED
|
||||
IrReceiver.begin(IR_RECEIVE_PIN, ENABLE_LED_FEEDBACK);
|
||||
|
||||
Serial.print(F("Ready to receive IR signals of protocols: "));
|
||||
printActiveIRProtocols(&Serial);
|
||||
Serial.println(F("at pin " STR(IR_RECEIVE_PIN)));
|
||||
|
||||
// infos for receive
|
||||
Serial.print(RECORD_GAP_MICROS);
|
||||
Serial.println(F(" us is the (minimum) gap, after which the start of a new IR packet is assumed"));
|
||||
Serial.print(MARK_EXCESS_MICROS);
|
||||
Serial.println();
|
||||
Serial.println(F("Because of the verbose output (>200 ms at 115200 baud), repeats are not dumped correctly!"));
|
||||
Serial.println();
|
||||
Serial.println(
|
||||
F(
|
||||
"If you receive protocol NEC, Samsung or LG, run also ReceiveDemo to check if your actual protocol is eventually NEC2 or SamsungLG, which is determined by the repeats"));
|
||||
Serial.println();
|
||||
|
||||
}
|
||||
|
||||
//+=============================================================================
|
||||
// The repeating section of the code
|
||||
//
|
||||
void loop() {
|
||||
if (IrReceiver.decode()) { // Grab an IR code
|
||||
// At 115200 baud, printing takes 200 ms for NEC protocol and 70 ms for NEC repeat
|
||||
Serial.println(); // blank line between entries
|
||||
Serial.println(); // 2 blank lines between entries
|
||||
IrReceiver.printIRResultShort(&Serial);
|
||||
// Check if the buffer overflowed
|
||||
if (IrReceiver.decodedIRData.flags & IRDATA_FLAGS_WAS_OVERFLOW) {
|
||||
Serial.println(F("Try to increase the \"RAW_BUFFER_LENGTH\" value of " STR(RAW_BUFFER_LENGTH) " in " __FILE__));
|
||||
// see also https://github.com/Arduino-IRremote/Arduino-IRremote#compile-options--macros-for-this-library
|
||||
} else {
|
||||
if (IrReceiver.decodedIRData.protocol == UNKNOWN) {
|
||||
Serial.println(F("Received noise or an unknown (or not yet enabled) protocol"));
|
||||
}
|
||||
Serial.println();
|
||||
IrReceiver.printIRSendUsage(&Serial);
|
||||
Serial.println();
|
||||
Serial.println(F("Raw result in internal ticks (50 us) - with leading gap"));
|
||||
IrReceiver.printIRResultRawFormatted(&Serial, false); // Output the results in RAW format
|
||||
Serial.println(F("Raw result in microseconds - with leading gap"));
|
||||
IrReceiver.printIRResultRawFormatted(&Serial, true); // Output the results in RAW format
|
||||
Serial.println(); // blank line between entries
|
||||
Serial.print(F("Result as internal 8bit ticks (50 us) array - compensated with MARK_EXCESS_MICROS="));
|
||||
Serial.println(MARK_EXCESS_MICROS);
|
||||
IrReceiver.compensateAndPrintIRResultAsCArray(&Serial, false); // Output the results as uint8_t source code array of ticks
|
||||
Serial.print(F("Result as microseconds array - compensated with MARK_EXCESS_MICROS="));
|
||||
Serial.println(MARK_EXCESS_MICROS);
|
||||
IrReceiver.compensateAndPrintIRResultAsCArray(&Serial, true); // Output the results as uint16_t source code array of micros
|
||||
IrReceiver.printIRResultAsCVariables(&Serial); // Output address and data as source code variables
|
||||
Serial.println(); // blank line between entries
|
||||
|
||||
IrReceiver.compensateAndPrintIRResultAsPronto(&Serial);
|
||||
|
||||
/*
|
||||
* Example for using the compensateAndStorePronto() function.
|
||||
* Creating this String requires 2210 bytes program memory and 10 bytes RAM for the String class.
|
||||
* The String object itself requires additional 440 bytes RAM from the heap.
|
||||
* This values are for an Arduino Uno.
|
||||
*/
|
||||
// Serial.println(); // blank line between entries
|
||||
// String ProntoHEX = F("Pronto HEX contains: "); // Assign string to ProtoHex string object
|
||||
// if (int size = IrReceiver.compensateAndStorePronto(&ProntoHEX)) { // Dump the content of the IReceiver Pronto HEX to the String object
|
||||
// // Append compensateAndStorePronto() size information to the String object (requires 50 bytes heap)
|
||||
// ProntoHEX += F("\r\nProntoHEX is "); // Add codes size information to the String object
|
||||
// ProntoHEX += size;
|
||||
// ProntoHEX += F(" characters long and contains "); // Add codes count information to the String object
|
||||
// ProntoHEX += size / 5;
|
||||
// ProntoHEX += F(" codes");
|
||||
// Serial.println(ProntoHEX.c_str()); // Print to the serial console the whole String object
|
||||
// Serial.println(); // blank line between entries
|
||||
// }
|
||||
}
|
||||
IrReceiver.resume(); // Prepare for the next IR frame
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,52 @@
|
||||
START ../src/ReceiveDump.cpp from Nov 12 2022
|
||||
Using library version 4.0.0
|
||||
Ready to receive IR signals of protocols: NEC/NEC2/Onkyo/Apple, Panasonic/Kaseikyo, Denon/Sharp, Sony, RC5, RC6, LG, JVC, Samsung, Whynter, Lego Power Functions, Bosewave , MagiQuest, Universal Pulse Distance Width, Hash at pin 2
|
||||
5000 us is the (minimum) gap, after which the start of a new IR packet is assumed
|
||||
20 us are subtracted from all marks and added to all spaces for decoding
|
||||
|
||||
|
||||
Protocol=Samsung Address=0x707 Command=0x4 Raw-Data=0xFB040707 32 bits LSB first
|
||||
|
||||
Send with: IrSender.sendSamsung(0x707, 0x4, <numberOfRepeats>);
|
||||
|
||||
Raw result in internal ticks (50 us) - with leading gap
|
||||
rawData[68]:
|
||||
-27948
|
||||
+90,-84
|
||||
+12,-32 +12,-32 +12,-32 +12,-11
|
||||
+11,-11 +11,-11 +11,-11 +11,-11
|
||||
+12,-32 +12,-32 +12,-32 +12,-10
|
||||
+12,-10 +12,-10 +12,-10 +12,-11
|
||||
+11,-11 +11,-11 +11,-33 +11,-11
|
||||
+11,-11 +11,-11 +11,-11 +11,-11
|
||||
+12,-32 +12,-32 +12,-10 +12,-32
|
||||
+12,-32 +12,-32 +12,-32 +12,-32
|
||||
+12
|
||||
Sum: 1200
|
||||
Raw result in microseconds - with leading gap
|
||||
rawData[68]:
|
||||
-1397400
|
||||
+4500,-4200
|
||||
+ 600,-1600 + 600,-1600 + 600,-1600 + 600,- 550
|
||||
+ 550,- 550 + 550,- 550 + 550,- 550 + 550,- 550
|
||||
+ 600,-1600 + 600,-1600 + 600,-1600 + 600,- 500
|
||||
+ 600,- 500 + 600,- 500 + 600,- 500 + 600,- 550
|
||||
+ 550,- 550 + 550,- 550 + 550,-1650 + 550,- 550
|
||||
+ 550,- 550 + 550,- 550 + 550,- 550 + 550,- 550
|
||||
+ 600,-1600 + 600,-1600 + 600,- 500 + 600,-1600
|
||||
+ 600,-1600 + 600,-1600 + 600,-1600 + 600,-1600
|
||||
+ 600
|
||||
Sum: 60000
|
||||
|
||||
Result as internal ticks (50 us) array - compensated with MARK_EXCESS_MICROS=20
|
||||
uint8_t rawTicks[67] = {90,84, 12,32, 12,32, 12,32, 12,11, 11,11, 11,11, 11,11, 11,11, 12,32, 12,32, 12,32, 12,10, 12,10, 12,10, 12,10, 12,11, 11,11, 11,11, 11,33, 11,11, 11,11, 11,11, 11,11, 11,11, 12,32, 12,32, 12,10, 12,32, 12,32, 12,32, 12,32, 12,32, 12}; // Protocol=Samsung Address=0x707 Command=0x4 Raw-Data=0xFB040707 32 bits LSB first
|
||||
|
||||
Result as microseconds array - compensated with MARK_EXCESS_MICROS=20
|
||||
uint16_t rawData[67] = {4480,4220, 580,1620, 580,1620, 580,1620, 580,570, 530,570, 530,570, 530,570, 530,570, 580,1620, 580,1620, 580,1620, 580,520, 580,520, 580,520, 580,520, 580,570, 530,570, 530,570, 530,1670, 530,570, 530,570, 530,570, 530,570, 530,570, 580,1620, 580,1620, 580,520, 580,1620, 580,1620, 580,1620, 580,1620, 580,1620, 580}; // Protocol=Samsung Address=0x707 Command=0x4 Raw-Data=0xFB040707 32 bits LSB first
|
||||
|
||||
uint16_t address = 0x707;
|
||||
uint16_t command = 0x4;
|
||||
uint32_t data = 0xFB040707;
|
||||
|
||||
Pronto Hex as string
|
||||
char prontoData[] = "0000 006D 0022 0000 00AE 00A1 0018 003D 0018 003D 0018 003D 0018 0014 0016 0014 0016 0014 0016 0014 0016 0014 0018 003D 0018 003D 0018 003D 0018 0012 0018 0012 0018 0012 0018 0012 0018 0014 0016 0014 0016 0014 0016 003F 0016 0014 0016 0014 0016 0014 0016 0014 0016 0014 0018 003D 0018 003D 0018 0012 0018 003D 0018 003D 0018 003D 0018 003D 0018 003D 0018 06C3 ";
|
||||
Reference in new issue
Block a user